EIE Instruments Private Limited

Compliance With Following National / International Standards:

ASTM D1559,ASTM D5581, AASHTO T245, EN 12697-12, EN 12697-34

Also available in various number of moulds. 

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer. 

 

Compliance With Following National / International Standards:

IP 34, ASTM D‑93, IS ‑ 1448 and IS ‑ 1209

This is widely used for determination for closed cup Flash Point of Fuel Oil, cut back asphalts, other viscous material and suspension of solids having a flash point above 49° C (50° C ‑ 360° C).


Also available in various models such as : 1) With Energy Regulator 2) With Voltage Stirrer 3) Digital with Motorised Stirrer 4) Semi Automatic with Heating Facility 5) Semi Automatic with Heating and Cooling Facility and 6) Fully Automatic

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Salient Features:

• Fully Automatic operational Design

• Compact design and rugged
• construction ensures long service life and facilitates easy transport for field applications.

• Sturdy cast iron base provides excellent support

• Digital Alphanumerical LCD touch screen display with keyboard (LCD Make : Schneider Electric)

• Optoelectronically depth detection & measurement through imported optoelectronic sensor

• Automatically timed programmable penetration measurements - Preset penetration time at factory (Operator can also enter the user defined penetration interval through LCD touch screen)

• Motorized placement of penetrator on sample surface

• Penetrometer arm automatically comes back to its home position at the end of 5 seconds penetration test

• In-built Facility to tare and reset the measurement results

• Display resolution of penetration depth in tenths of units (0.01mm)

• Magnifying lens for adjusting needle tip/cone tip exactly on the sample surface

• Low voltage Illuminator mounted on flexible arms to assist an operator during testing

• Built-in spirit level and leveling screws to ensure proper alignment

• Micrometer differential gearing mechanism for fine movement of head

• Weight of the Needle/Cone and plunger match the criteria of ASTM and IP requirements.

• The penetration time is controlled and indicated on Digital LCD display with least count of 0.1 second.

• The optoelectronic sensor installed within the instrument detects the penetration depth in 10th of millimeter (0.01mm)

• The penetration value is measured and indicated on digital LCD display

• Large, removable base accommodates grease worker cups and other ASTM and non-standard sample containers

• Complete selection of penetrometer cones, needles and accessories for petroleum products testing and for a wide range of other applications (See optional accessories)

• Supplied complete with Needle/cone, container and applicable weight

• Weight of 50 Grams - 1 No.

• Penetration cup of 55mm diameter x 35mm height - 1 No.

• Penetration cup of 70mm diameter x 45mm height - 1 No.

• Transfer dish - 1 No.

• Penetrometer Needle - 1 No.

• Needle Holder 47.5g ± 0.05g - 1 No.7) Thermometer ASTM 17C (+19 to 27 °C) - 1 No.

Specifications:

• Sample container of 100mm dia x 100mm height - 1 No
• Transfer dish - 1 No
• Penetrometer Hollow 90° brass cone, Highly polished stainless steel tip - 2 Nos

Supplied complete with following Accessories in case of Bitumen penetration

Note - Price will be change as per specification

Compliance With Following National / International Standards:

ASTM D2041, AASHTO T209, AASHTO T283

Used for determining the theoretical maximum specific gravity of uncompacted bituminous paving mixtures. 

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National / International Standards:

As per IP 72, IS 1206 and BS 3235

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Test Method for Measurement of Excess Asphalt in Slurry Surfacing Systems by Use of a Loaded Wheel Tester and Sand Adhesion

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National / International Standards:

AS PER IP 72 AND IS : 1206 & BS : 3235, Part-1

It is used for determining the viscosity of cut back bitumen and road oil.

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Consist of 2 orifice cups in a S.S. (Stainless Steel) Water Bath mounted on Stand with leveling feet. Instrument is Fitted with 1000 watts ISI marked heating elements.

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National / International Standards:

IP 71, ASTM D445, ASTM D446

Also availabe with : 2 Viscometer, 3 Viscometer, 4 Viscometer, 6 Viscometer and 8 Viscometer.

Used to determine the viscosity of oils and fuel, above room temperature up to a maximum of 120 °C.

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer. 

 

 

Compliance With Following National / International Standards:

EN 1427 | ASTM D36 | AASHTO T53 | IP 58 | IS 1205


Also called Softening Point Apparatus. This apparatus is meant for determination of softening point of bituminous materials according to listed ASTM & IP Standards.

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National / International Standards:

IRC-SP-53-2002 and IS 15462-2004

Made of brass /Gunmetal material. 

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

We are offering wide range of Torsion Testing Machine, which causes section of a bar or shaft to rotate about its central longitudinal axis relatively to another such section and which thus produces twist or torsion in the bar, constitutes a torsional load. The load may be composed of forces acting in any direction but the twisting or torsional affect is provided by the couples formed by these forces in planes normal to the central axis. The torsional shearing stresses in circular cross section vary from zero at the axis of the section to a maximum value at the extreme fibres. If no bending is present pure shear exists. Torsion Testing machine Consists of two independent chucks. The twist is communicated through the test piece to the other jaw on which a weighted pendulum is attached. The resistance to deflection of pendulum causes a torque to be applied to the test piece and the angles of deflection of pendulum is the measure of torque. The machine is built for maximum twisting moment at about 50 kgm. It is equipped with jaws for accomo- dating test pieces of 10 mm, 15 mm and 20 mm size either square or circular with square shoulder.

Specifications:

• Capacity : 0 to 50 kgm.
• Range : ONE
• Rod to be tested : 8 to 20 mm.
• Load of Measurement : Torque and Twist will be read directly.
• Other provisions : Automatic stop in case of failure of specimen.

Note : Price will be change as per specification

Compliance With Following National / International Standards:

AS PER EN 12697-27, ASTM D 5361

Core drilling Machine to take out core sample from Asphalt, concrete & reinforced structure

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National / International Standards:

ASTM D5


The bath is double walled, inner chamber consisting of thick polished stainless steel with cooling coil duly soldered on the outside of the same to ensure perfect cooling effect to achieve low temp. up to +5°C. 

Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

As per ASTM D6926

It consists of three parts: heating pot, stirrer and Lifting mechanism. 

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

As per ASTM D6926

It consists of three parts: heating pot, stirrer and Lifting mechanism. It consists of three parts: heating pot, stirrer and Lifting mechanism. The temperature of the heating pot can be set arbitrarily from room temperature to 250 ℃, and the temperature can be controlled automatically. The agitator is composed of a mixing head, a motor and a mixing paddle. During operation, the mixing paddle rotates and rotates in the pot to mix the mixture. The mixing time is controlled by timer and can be set arbitrarily in the range of 1-9999 seconds. The lifting mechanism is composed of motor, belt reducer, lead screw and other components, which is used to realize the lifting of agitator. When feeding or discharging, the agitator rises to the highest position, while when mixing, the agitator drops to the lowest position. 

The Price mentioned here are subject to change as per the capacity, specifications and application of the user.