Cement Testing Equipment

Product Details:

Compliance With Following National / International Standards:

EN 196-6, ASTM C204, BS 4550

This test method concerns the determination of the particle size of Portland cement, limes and similar powders using the Blaine air permeability apparatus. The measure of fineness is expressed in terms of the specific surface area (the total particle surface area) in square centimeters per gram or square meters per kilogram

Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Additional Information:

• Production Capacity: 250 Per annum
• Delivery Time: 3-4 Week after received of confirm order
• Packaging Details: Wooden Box / Corrugated Box

Product Details:

Compliance With Following International Standards:

IS 5512

Also available in M.S. Steel Top.

Flow table consist of a brass table top 250 ± 2.5 mm dia mounted on a rigid stand. The table top is reinforced with equally disposed ribs and allowed to drop through 12 mm by a ground and hardened cam, Complete with mould- 100 mm base dia, 70 mm top dia and 50 mm high. The cam shaft is rotated at the rate of 100 RPM by an electric motor. Suitable for operation on 230 Volts 50 cycles. Single Phase, A.C.Supply. Further details available on our website.



The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Additional Information:

• Item Code: TM-80-GM

Product Details:

Compliance With Following International Standards:

IS 10078 :1982, EN 196-1, EN ISO 679


Used to compact rectangular 40 x 40 x 160mm of port land and pozzolana cement mortar prism specimens for determining the transverse strength. 

Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Additional Information:

• Item Code: TM-085
• Production Capacity: 100 per month
• Delivery Time: Please ask
• Packaging Details: Wooden Box

Product Details:

Compliance With Following International Standards:

IS:1727 and IS:2645


Also available in THREE CELL & SIX CELL. 

The test method is for determining the permeability to water of pozzolana mortar prepared and cured under specified conditions, by measuring the percolation of water through standard cylindrical specimens. 

Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Additional Information:

• Item Code: TM-138
• Production Capacity: 100 Per Year
• Delivery Time: Please Ask
• Packaging Details: Wooden Box / Corrugated Box

Product Details:

Compliance With Following International Standards:

ASTM D638, ASTM D412


For CEMENT HDPE BAG Tensile Strength Test. 

Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Additional Information:

• Item Code: PT-115DP250

Product Details:

Compliance With Following International Standards:

IS : 4031 (Part-11), ASTM C188, EN-196


The water bath in general will fulfill the requirements of IS:4031 (Part 11) Method of Physical tests for hydraulic cement (Determination of Density). 

Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Product Details:

Compliance With IS:11262

Used to determine the heat of hydration of low heat Portland and hydraulic cement. The instrument is used for determining heat of hydration of cement by measuring difference between heat of solution of dry cement and heat of solution of a separate sample partially heated for 7 days & 28 days. Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Additional Information:

• Packaging Details: Wooden Box

Product Details:

Compliance With Following International Standards:

As per IS: 516, IS: 9399, BS: 1881, ASTM C78

Used for the determination of modulus of rupture of concrete, that is, 15 x 15 x 70 cm or 10 x 10 x 50 cm beams by third point loading method

Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Additional Information:

• Production Capacity: 100
• Delivery Time: Please ask
• Packaging Details: Wooden Box

Product Details:

Compliance With Following International Standards:

IS : 3346‑1966, ASTM C177

EIE - Thermal Conductivity Apparatus is designed to determine Thermal Conductivities of insulating materials in the form of slabs. Particularly suitable for AAC Block.

Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Additional Information:

• Item Code: EIE-7013
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
• Port of Dispatch: Ahmedabad Airport
• Production Capacity: 100 per annum
• Delivery Time: Please Ask
• Packaging Details: Wooden Box / Corrugated Box

Product Details:

Compliance With Following International Standards:

IS : 9013

Accelerated Curing Tank having capacity to accommodate 3 Nos. concrete cube moulds of 15 cm with a facility for accelerated curing by boiling water method up to temperature range : 100 ± 2 °C as per IS standard IS : 9013. Also it will have capacity for curing by warm water method at temperature 55 ± 2 °C.

Also available in various models.

Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

 

Additional Information:

• Item Code: VIPL-042-3
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
• Port of Dispatch: Ahmedabad Airport
• Production Capacity: 100 Per Month
• Delivery Time: Please Ask
• Packaging Details: Wooden Box / Corrugated Box

Product Details:

Compliance Standards

IS : 10080 - 1982

 

Applications

The mould is used in determining compressive strength of cement mortar. 

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Additional Information:

• Item Code: TM-110
• Production Capacity: 300 per month
• Delivery Time: Please ask
• Packaging Details: Wooden Box / Corrugated Box

Product Details:

Compliance With Following International Standards:

IS 2542 (P-1), ASTM C472


Is used to determine the volume of water required for mixing Gypsum Plaster When performing the setting time and compressive strength test. 

Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Additional Information:

• Item Code: TM-202-M
• Production Capacity: 100 Per Month
• Delivery Time: Please Ask
• Packaging Details: Wooden Box / Corrugated Box

Product Details:

Double walled, Inner and Outer Chamber made of heavy gauge S.S. 304 , fully argon welded, Glasswool insulation, Temp. range 5°C above ambient to 99°C , Temp. control  By Auto Tuning dual display PID Digital Controller, with  Stainless steel lid with  6 Holes to accommodate 6 S.S.dyepots of 250 ml.

Also available in Complete S.S. - 12 x 500

Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

 

 

Additional Information:

• Item Code: EIE-402TGD06
• Production Capacity: 100 Per Month
• Delivery Time: Please Ask
• Packaging Details: Wooden Box / Corrugated Box

Product Details:

Compliance With Following International Standards:

IS - 1199


The flow table test or flow test is a method to determine the consistence of fresh concrete & flow of Portland cement concrete. 

Further details available on our website

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Additional Information:

• Production Capacity: 100 per month
• Delivery Time: 3-4 weeks
• Packaging Details: Wooden Box

Product Details:

Compliance With Following International Standards:

EN 196, ASTM C109


This jig is designed for testing of 40 x 40 x 160mm cement prism after breaking in Flexure and also can be adapted with 50mm platen to test 2” or 50mm mortar cement cube specimen. This jig can be fitted to Compression Test Machine. Further details available on our website.


The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Product Details:

Compliance With Following International Standards:

EN 459-2, ASTM C110


Used for determining the reactivity on slaking of ground quicklime. 

Further details available on our website.


The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Additional Information:

• Item Code: EIE-7014

Product Details:

Compliance With Following International Standards:

ASTM C266, AASHTO T154


Used to determine initial and final set times of portland cement, masonary cement, hydraulic hydrated lime and certain mortars.

Further details available on our website.


The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Product Details:

Compliance With Following International Standards:

ASTM C430, BS EN 451-2


Wet Sieving Apparatus is used for determining the fineness of fly ash. 

Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Product Details:

Compliance With Following International Standards:

4031 (Part-15).


Wet Sieving Apparatus is used for determining the fineness of fly ash. 

Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Product Details:

Compliance With Following International Standards:

ASTM C 156 1980

• The mould is made of stainless steel material and it is water tight as per the standard requirement.
• The mould is rigidly constructed to prevent distortion and it is thoroughly cleaned.
• The interior faces of the mould are plane surface.
• Humidity Oven and Reflectance meter also available

Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Product Details:

Compliance With Following International Standards:

IS : 9013

Accelerated Curing Tank having capacity to accommodate various sizes of concrete cube moulds or Cement mortar Cube Moulds, with a facility for accelerated curing by boiling water method up to temperature range : 100 ± 2°C as per IS standard IS : 9013.

Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Additional Information:

• Item Code: EIE408HCS12
• Production Capacity: 100 Per Month
• Delivery Time: Please Ask
• Packaging Details: Wooden Box / Corrugated Box

Product Details:

Compliance With Following International Standards:

EN 196, EN 1015,ASTM C348

The flexural Jig is designed for testing of 40 x 40 x 160mm cement prism. The frame is fitted with roller beaters accordance to EN 196-1.
Robust frame fitted with an upper bearer that moves vertically supported by springs. Further details available on our website.


The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Product Details:

Compliance With Following International Standards:

IS 5513

Applications

For determination of consistency of standard cement paste and initial and final setting times of cement.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/A
• Port of Dispatch: Ahmedabad Airport
• Production Capacity: 100 Per Month
• Delivery Time: Please Ask
• Packaging Details: Wooden Box / Corrugated Box

Product Details:

Compliance With Following International Standards:

IS : 269, 712, 5514, 1727, 2645, 4031 (Part 3), 6932 (Part-IX)

 

BS : 890, 915, 1370, 4027, 4226 & 4248

 

EN 196-3

The apparatus consist of a small split cylinder of spring brass metal of 0.5 mm thickness forming a mould of 30 mm internal diameter and 30 mm high. 

Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Additional Information:

• Item Code: TM-102
• Production Capacity: 100 Per Month
• Delivery Time: Please Ask
• Packaging Details: Wooden Box / Corrugated Box

Product Details:

Compliance With Following International Standards:

AS PER IS:516:PART 2 SEC.1

Used for measurement of drying shrinkage. Length measuring device, reference points of 6.5mm dia and all other accessories required for the drying shrinkage test are to be purchased separately. 

Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

 

Additional Information:

• Item Code: TM-168-DSA
• Production Capacity: 100 per month
• Delivery Time: Please ask
• Packaging Details: Wooden Box / Corrugated Box

Product Details:

Compliance With Following National / International Standards:

ASTM C939, ASTM-D6910/D6910M-09



This cone is used to find out viscosity of Bentonite slurry and like material. 

Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Additional Information:

• Item Code: EIE-MC
• Production Capacity: 100 Per Month
• Delivery Time: Ready stock
• Packaging Details: Wooden Box / Corrugated Box

Product Details:

Compliance With Following International Standards:

IS 4031:1988 (P-3), ASTM C151, ASTM C490

The Autoclave is suitable for conducting accelerated soundness test on cements by the autoclave expansion test requiring constant steam pressure with the correspondent constant temperature. 
Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Additional Information:

• Item Code: TM-014
• Production Capacity: 100 Per Year
• Delivery Time: Please Ask
• Packaging Details: Wooden Box / Corrugated Box

Product Details:

Model Number : EIE-106RP324

1. CE Certified
2. Double wall construction
3. Interior fabricated from high grade stainless steel (S.S.304).
4. Exterior body made of Mild steel material- which is duly powder coated in attractive shades

Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Additional Information:

• Item Code: EIE-106RP324
• Production Capacity: 100 Per Month
• Delivery Time: Please Ask
• Packaging Details: Wooden Box / Corrugated Box

Product Details:

WATERBATH FOR SOUNDNESS TEST OF CEMENT -INNER S.S.- DIGITAL-WITH STAND

Compliance With Following International Standards:

IS 269, 712, 5514, 1727 , 2645, 6932 ( PART IX), BS 6463, EN 196-3

Working Principle:

Water bath capable of containing immersed Le-Chatlier moulds with specimens and of raising their temperature from 27 °C ± 2 °C to boiling in 27 ± 3 minutes.

 
Further details available on our website.


The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Additional Information:

• Item Code: EIE-403LCD
• Production Capacity: 100 Per Month
• Delivery Time: Please Ask
• Packaging Details: Wooden Box / Corrugated Box

Product Details:

Compliance With Following International Standards:

This IS : 6932 ( Part 6) - 1973 standard ( Part VI )


The Southard viscosimeter shall be used for adjusting the consistency of the putty and a vessel of the shape and dimensions which shall be used for the determination of the volume yield. 

Further details available on our website.


The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Additional Information:

• Item Code: TM-203
• Production Capacity: 100 Per Month
• Delivery Time: Please Ask
• Packaging Details: Wooden Box / Corrugated Box

Product Details:

Compliance With Following International Standards:

ASTM C230, ASTM C1437


Also available in M.S. Steel Top.

The flow table consists of a brass table top 250 ± 2.5 mm dia mounted on a rigid stand. The table top is reinforced with equally disposed ribs and allowed to drop through 12 mm by a ground and hardened cam, Complete with mould - 100 mm base dia, 70 mm top dia and 50 mm high. 

Further details available on our website.


The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Additional Information:

• Item Code: TM-79-GM

Product Details:

Photometric test Apparatus for quick determination of SO3 in cement. 

The Model is provided with double light intensity meter, as such useful where the % of SO3 is desired to be known with higher accuracy. The Model is of export quality & provided with constant voltage Transformer built in. Beside this the component used in is of the highest quality available in market.

Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Additional Information:

• Item Code: EIE-7011
• Production Capacity: 100 per annum
• Delivery Time: 3-4 Weeks after of receipt of confirmed order
• Packaging Details: Wooden packing with strong base

Product Details:

Compliance With Following National / International Standards:

IS 269, 712, 5514, 1727 , 2645, 6932 ( PART IX), BS 6463, EN 196-3

Water bath capable of containing immersed Le‑Chatelier moulds with specimens and of raising their temperature from 27' deg +/‑ 2'deg C to boiling in 27 +/‑ 3 minutes.

 

Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Additional Information:

• Item Code: EIE-403CLCD
• Production Capacity: 100 Per Month
• Delivery Time: Please Ask
• Packaging Details: Wooden Box / Corrugated Box

Product Details:

 

Compliance With Following International Standards:

EN 196-1 & EN 196-3, IS : 4031, IS 10890, IS : 1727, ASTM C451


The instrument is specially designed to prepare cement mortar for Strength Determination. It is used for mixing cement pastes, mortars and pozzolanas. It can also be used for uniform mixing of soils with additives such as lime, cement, etc. Further details available on our website.

 

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Additional Information:

• Item Code: EIE-TM-121
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/A
• Port of Dispatch: Ahmedabad Airport
• Production Capacity: 100 per annum
• Delivery Time: 2-3 weeks after receipt of confirmed order
• Packaging Details: Wooden packing with strong base

Product Details:

Compliance With Following International Standards:

ASTM C188, AASTHO T133, EN 196-6, IS :4031 (Part XIII)

Used for measurement of specific gravity of hydraulic cements. 

Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Additional Information:

• Item Code: CA-1002
• Production Capacity: 100 Per Month
• Delivery Time: Please Ask
• Packaging Details: Wooden Box / Corrugated Box

Product Details:

EIE is engaged into manufacturing and marketing of various testing instruments and equipments for more than 30 years. The company is highly focused on manufacturing each and every product as per customer expectations that make us one of the most reputed names in the manufacturing history. Our testing products are available in wide range to satisfy varied industrial needs and demands.

When skills and quality combines, miracle happens

Concrete is the strength in imagination. Concrete test is necessary to assess the variations of quality of concrete being supplied. In case of cement-concrete, Selection & mixing of right ingredients in right quantity results into practical miracles. The grey colored fine powder and its mix has witnessed the all human struggles & success in winning over landscapes, sacred rivers, appealing oceans and stubborn mountains. Skyscrappers are perfect significance of tiny men’s titanic jumps. The good infrastructure of building, roads, dams and highways largely depends on flawless construction. To evaluate this quality of flawless construction, EIE Instruments offers wide array of cement testing instruments and Cement Testing Equipment’s. Our complete cement testing instruments and Cement Testing Equipment range includes accelerated curing tank, vibrating table, compaction factor apparatus, Compression testing machine, concrete penetrometer, cube mould, cylindrical mould, vicat needle apparatus etc.

Note : Price will be change as per specification

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
• Port of Dispatch: Ahmedabad
• Production Capacity: 500 Per annum
• Delivery Time: 4-6 weeks after receipt of firm order
• Packaging Details: Wooden packing with strong base

Product Details:

Compliance With Following International Standards:

IS 9103, EN 12350-5

Flow table top will be Constructed from a flat metal plate of minimum thickness 1.5mm. The top will have a plan area of 700mm x 700mm and a flatness of within 1.5mm. Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Product Details:

Compliance With Following International Standards:

IS 4031, IS 9459, ASTM C452, ASTM C151, ASTM C490

Also available with Digital Dial Gauge Model.

To measure length change in hardened cement paste, mortar and concrete, using a suitable micrometer. 
Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Additional Information:

• Production Capacity: 100 Per Month
• Delivery Time: Please Ask
• Packaging Details: Wooden Box / Corrugated Box

Product Details:

Compliance With Following International Standards:

IS : 10080, IS : 4031, EN 12390-3, EN 12390-1

Applications:

A specially designed vibration machine is used for vibrating the mix in moulds at a frequency of 12000 ± 400 cycles per minute, as per specifications. 

Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Additional Information:

• Item Code: EIE-TM-199
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/A
• Port of Dispatch: Ahmedabad Airport
• Production Capacity: 100 Per Month
• Delivery Time: Please Ask
• Packaging Details: Wooden Box / Corrugated Box

Product Details:

Compliance With Following International Standards:

IS:10078, EN-196-1, EN ISO 679


Further details available on our website.


The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Additional Information:

• Item Code: TM-085.1