Grease And Wax Testing Equipment

Product Details:

Compliance with following International Standards
ASTM D-217, ASTM D4950, IP 50

Note : Price will be change as per specification

Additional Information:

• Item Code: PTGT-125MII
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
• Port of Dispatch: Ahmedabad Airport
• Production Capacity: 100 per annum
• Delivery Time: 3-4 weeks after receipt of firm order
• Packaging Details: Plywood packing with robust foundation at the base

Product Details:

We have complete range of Petroleum Product Testing Equipments for Lubricating Oil, Transformer Oil, Grease, Wax, Bitumen, Bitumen emulsion. For more details please refer our website or PDF attached herewith

Additional Information:

• Item Code: EIE-PT
• Production Capacity: Depends upon the Item and Qty
• Delivery Time: Depends upon the item and Qty
• Packaging Details: Wooden or Corrugated Box

Product Details:

As per IP 124, ASTM D665, ASTM D3603, ASTM D 5534, NACE TM0172. Supplied complete with Thermometer ASTM 9C, ASTM 20C & ASTM 21C (1 each), Steel Test Specimen : 4 Nos., Test Beakers (400ml) with covers : 4 Nos; Beaker cover (PTFE) for ASTM D665  : 4 Nos; Teflon holder (PTFE) for D665 : 4 Nos; and Auxiliary Stirrer Blade for ASTM D665 Procedure C (heavier than water fluids)  : 1 No. Grinding and Polishing device and grinding papers available at extra cost

Note : Price will be change as per specification

Additional Information:

• Item Code: EIE-PTLT-113
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Ahmedabad Airport
• Production Capacity: 100 per annum
• Delivery Time: 3-4 weeks after receipt of firm order
• Packaging Details: Plywood packing with strong base

Product Details:

Compliance with ASTM D1401 Standard. Supplied with Heating bath, Common Stirring paddles (Common electric motor), Four test cylinders of 100 mL capacity, Touch screen HMI & PLC Control system with Automatic Lifting and Placement arrangement

Note : Price will be change as per soecification

Additional Information:

• Item Code: EIE-PTLT-118A
• Production Capacity: 100 Per annum
• Delivery Time: 3-4 Weeks after receipt of confirmed order
• Packaging Details: Wooden packing with strong base

Product Details:

Compliance Standards : ASTM D1831, MIL G 10924.

Note : Price will be change as per specification

Additional Information:

• Item Code: EIE-PTGT-137CII
• Production Capacity: 150 per annum
• Delivery Time: 3-4 weeks after receipt of firm order
• Packaging Details: Plywood packing with strong base

Product Details:

As per ASTM D1321. Supplied complete with adjustable needle holder, penetration needle, sample container,Brass Plate, and weight of 50 gms. Waterbath to be purchased at extra cost

Note : Price will be change as per specification

Product Details:

Compliance with following International Standards

ASTM D1881

Note : Price will be change as per specification

Additional Information:

• Item Code: EIE-PTEC
• Production Capacity: 100 Per annum
• Delivery Time: 3-4 weeks after receipt of firm order
• Packaging Details: Plywood packing with strong base

Product Details:

Complies with ASTM D1401 Requirement. Supplied with Heating bath, Common Stirring paddles (Common electric motor), Four test cylinders of 100 mL capacity, Digital temperature controller with Manual Lifting and Placement arrangement of stirrer.

Note : Price will be change as per specification

Additional Information:

• Item Code: EIE-PTLT-118M
• Production Capacity: 150 Per annum
• Delivery Time: 3-4 weeks after receipt of firm order
• Packaging Details: Wooden packing with strong base

Product Details:

As per ASTM D2386 IP 16 NFM 07048 ISO 3013 DIN 51421. The entire instrument assembly Consists of Unsilvered vacuum flask, Jacketed sample tube, Brass packing gland, Motorized stirrer, Stopper, Clamps, Refrigerated water-bath and Stand. Temperature range from 0 Degree Centigrade to -80 Degree Centigrade.

Note : Price will be change as per specification

Additional Information:

• Production Capacity: 100 Per annum
• Delivery Time: 3-4 weeks after receipt of firm order
• Packaging Details: Plywood packing with strong base

Product Details:

Compliance with following International Standards
ASTM D-217, ASTM D4950, IP 50

Note : Price will be change as per specification

Additional Information:

• Item Code: EIE-PTGT-129MII
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
• Port of Dispatch: Ahmedabad Airport
• Production Capacity: 500 per annum
• Delivery Time: 3-4 weeks after receipt of firm order
• Packaging Details: strong plywood packing with robust foundation

Product Details:

As Per EIE-PTLT-126A

Additional Information:

• Item Code: EIE-PTLT-126A
• Production Capacity: 100 Per annum
• Delivery Time: 3-4 weeks after receipt of firm order
• Packaging Details: Plywood packing with strong base

Product Details:

Compliance Standards : ASTM D1831, MIL G 10924.

Price will be change as per specification

Additional Information:

• Item Code: EIE-PTGT-137CIV
• Production Capacity: 100 per annum
• Delivery Time: 3-4 weeks after receipt of firm order
• Packaging Details: Plywood packing with strong base

Product Details:

We Have Different Type Of Standard Penetrometer:

• With digital timer

• With geared height adjustment - manual-

• 4th scale penetrometer-

Price will be change as per specification

 

 

 

 

 

Additional Information:

• Item Code: EIE-PTGT-130AT
• Production Capacity: 150 Per annum
• Delivery Time: 3-4 Weeks after receipt of confirmed order
• Packaging Details: Wooden packing with strong base

Product Details:

Compliance Standards
ASTM D1743

Purpose
This test method covers the determination of the corrosion preventive properties of greases using grease-lubricated tapered roller bearings stored under wet conditions. This test method is based on CRC T echnique L 41 that shows correlations between laboratory results and service for grease lubricated aircraft wheel bearings. 

Operating Principle
Distributes a lubricating grease sample in a roller bearing by running the bearing under light thrust load. Corrosion preventive capability is determined on a pass/fail basis by the presence of rust spots (1mm or larger) on the bearing race after a 60 second run-in period, followed by prolonged exposure to water at constant temperature.

Note : Price will be change as per specification

Additional Information:

• Production Capacity: 100 per annum
• Delivery Time: 3-4 weeks after receipt of firm order
• Packaging Details: Plywood packing with strong base

Product Details:

Compliance with following international standards

ASTM D943, IP 48, IP 280, IP 306, IP 307, IP 331, IP 335

Note : Price will be change as per specification

 

 

 

Additional Information:

• Item Code: EIE-PTLT-116
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Ahmedabad Airport
• Production Capacity: 100 per annum
• Delivery Time: 3-4 weeks after receipt of firm order
• Packaging Details: Plywood packing box with robust foundation at the base

Product Details:

 

Compliance with following International Standards

ASTM D6371, IP 309, IS 1448 Part 110

Note : Price will be change as per specification

 

Additional Information:

• Item Code: EIE-PTLT-126M
• Production Capacity: 100 Per annum
• Delivery Time: 2-3 weeks after receipt of firm order
• Packaging Details: Plywood packing with strong base

Product Details:

Complies with following International Standards - IP 154 & IS 1448 (P 15), ASTM D 130, IP 227, ASTM D 4814. The set up consist of Copper Corrosion test vessel, stainless steel with  O rings, screw type cap, for use up to 100 psi. - 1 No, Laminated double sided comparison chart INDIAN.,Copper Strips, 3" x 0.5" x 12 SWG, (Pack of 3), SILVER TEST STRIPS, 99.9% purity (pack of 5), GLASS SUPPORT CRADLE, to accept silver test strip, Cold finger Condenser for silver strip test as per IP 227, Bench top vice to hold up to 5 strips for polishing.Test Tubes of 25 mm diameter & height 150 mm pack of 10. Test Tube stand, to hold 3 test tubes of 25 mm diameter & height 150 mm and Vented stopper made from silicon rubber for test tube - 10 Nos.

Note : Price will be change as per specification

Additional Information:

• Item Code: EIE-PTLT-106D
• Production Capacity: 250 Per annum
• Delivery Time: 2 to 3 Weeks after receipt of confirmed order
• Packaging Details: Wooden packing with strong base

Product Details:

We are Leading Manufacturers and Traders of Grease Penetrometer- hand operated.

Note - Price will be change as per specification

Additional Information:

• Production Capacity: 100 per annum
• Delivery Time: 3-4 Weeks after receipt of confirmed order
• Packaging Details: Wooden packing with strong base

Product Details:

we have different type standared penetrometre:

With Automatic Timer

Price will be change as per specification

Additional Information:

• Production Capacity: 100 Per annum
• Delivery Time: 3-4 Weeks after receipt of confirmed order
• Packaging Details: Wooden packing with strong base

Product Details:

As per ASTM D972, IP 183. Supplied with 2 Nos. evaporation cell. IP/ASTM Glass Thermometers available at extra cost.

Note : Price will be change as per specification

Additional Information:

• Item Code: EIE-PTGT-133
• Production Capacity: 100 Per annum
• Delivery Time: 3-4 weeks after receipt of firm order
• Packaging Details: Plywood packing with strong base

Product Details:

As Per ASTM D1264

Price will be change as per specification

Additional Information:

• Item Code: EIE-PTGT-135
• Production Capacity: 100 Per annum
• Delivery Time: 3-4 weeks after receipt of firm order
• Packaging Details: Plywood packing box with strong base

Product Details:

• Made of Aluminum Material
• Slope Ratio : 2.5% or as required (to be specified) 

Note: Price will be change as per specification

Additional Information:

• Production Capacity: 250 Per annum
• Delivery Time: 2-3 Weeks after receipt of confirmed order
• Packaging Details: corrugated box with robust foundation

Product Details:

Generally as per ASTM D 97, ASTM D 2500 & equivalent test methods. Digital temperature display with resolution of 0.1°C. Temperature control to within ± 1°C . Long life, high safety zone, stainless steel immersion heaters, Automatic low liquid level safety cut-off & drain to empty tank almost fully, Seamless copper jackets, with disks, gaskets, test jars, corks, Non CFC, future safe, environment friendly refrigeration stainless steel tanks, powder coated exterior, PUF insulation, wheels for easy mobility. Single Tank, with 4 test positions, with temperature settings with resolution of 0.1°C for tests at successively lower temperatures, with four sets of jackets, jars, disks, gaskets and corks. With minimum temperature of -30°C. 

Note : Price will be change as per specification

Additional Information:

• Item Code: PTLT-104R30
• Production Capacity: 100 Per annum
• Delivery Time: 3-4 Weeks after receipt of confirmed order
• Packaging Details: Wooden packing with strong base

Product Details:

Compliance with following International Standards

ASTM D2274, IP 388

Note : Price will be change as per specification

Additional Information:

• Item Code: EIE-PTLT-122
• Production Capacity: 100 Per annum
• Delivery Time: 3-4 Weeks after receipt of confirmed order
• Packaging Details: Wooden packing with strong base

Product Details:

The Copper Strip Tarnish Test assesses the relative degree of corrosivity of petroleum products, including aviation fuels, automotive gasoline, natural gasoline, solvents, kerosene, diesel fuel, distillate fuel oil, lubricating oil and other products. A polished copper strip is immersed in 30 mL of sample at elevated temperature. After the test period, the strip is examined for evidence of corrosion and a classification number from 1 4 is assigned based on a comparison with the ASTM Copper Strip Corrosion Standards. Detailed Specification as follows:  Price without accessories.

Note : Price will be change as per specification

Additional Information:

• Item Code: EIE-PTLT-105D
• Production Capacity: 100 Per annum
• Delivery Time: 3-4 Weeks after receipt of confirmed order
• Packaging Details: Wooden packing with strong base

Product Details:

We are Leading Manufacturers and Traders of Manual Grease worker.

Compliance with following International Standards

ASTM D-217, ASTM D4950, IP 50; 

Note : Price will be change as per specification

Additional Information:

• Production Capacity: 100 per annual
• Delivery Time: 3 to 4 Weeks after receipt of firm order
• Packaging Details: Plywood box packing with strong base

Product Details:

Purpose

This test method covers the determination of the dropping point of lubricating grease. 

 

Significance & Use

1.  The dropping point is useful to assist in identifying the grease as to type and for establishing and maintaining bench marks for quality control.

Apparatus Details

1. The complete test assembly consists of following parts & accessories

1) Grease Cup

1. A chromium-plated brass cup conforming to ASTM D2265. 
2. No of cups : 06 Nos

2) Test Tube

1. Thin walled soft glass test tube with rim
2. Length                  : 110 ± 1 mm 
3. Inside diameter    : 11 mm
4. Outside diameter : 13 mm max
5. No of tubes           : 06 Nos

3) Cup support 

1. Glass support tubing
2. Length                  :  16 ± 1 mm 
3. Inside diameter    : 9-10 mm
4. Outside diameter : 8-9 mm
5. No of support       :  06 Nos

4) Accessories

1. The entire instrument will be supplied with essential accessories such as Thermometer clamp, bushing, bushing support ring, thermometer depth gauge, a metal rod and a cup gauge.

Additional Information:

• Item Code: EIE-PTGT-132
• Pay Mode Terms: T/T (Bank Transfer),D/P,D/A
• Port of Dispatch: Ahmedabad Airport
• Production Capacity: 200 per annum
• Delivery Time: 2-3 weeks after receipt of confirmed order
• Packaging Details: Plywood packing box with strong base

Product Details:

Compliance with following international standards ASTM D2070, IS 11656. Complete set???up consists of essential accessories such as Oven, Aluminum block, 250 mL Griffin beakers, Copper test specimen, Steel test specimen. Other optional accessories will be provided at extra cost.

Note : Price will be change as per specification

Additional Information:

• Item Code: PTLT-120
• Production Capacity: 100 Per annum
• Delivery Time: 3 to 4 Weeks after receipt of confirmed order
• Packaging Details: Wooden packing with strong base