EIE Instruments Private Limited

Compliance With Following National Standards:

 IS : 2720 (PART 13) 1986 / IS : 11229 - 1985

Electronic Direct Shear Testing Machine with Software Interface, As per IS : 2720 (PART 13) 1986 / IS : 11229 - 1985, Supplied without PC/Laptop or Printer.

Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Compliance With Following National and International Standards:

IS : 2720 (PART 13) 1986 / IS : 11229 - 1985, ASTM D3080


In many engineering problems such as design of foundation, retaining walls, slab bridges, pipes, sheet piling etc. the value of the angle of internal friction and cohesion of the soil involved are required for the design and development. Direct shear test is used to predict these parameters quickly. The laboratory report cover the laboratory procedures for determining these values for cohesion less soils. Further details available on our website.




The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Compliance With Following National and International Standards:

BS 1377:9

Field Density test by Sand replacement method. Available in SMALL, MEDIUM and LARGE size

Used to determine the in-situ density of fine grained compacted soil

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following International Standards:

IS : 2720 (PART 13) 1986 / IS : 11229-1985



In many engineering problems such as design of foundation, retaining walls, slab bridges, pipes, sheet piling etc. the value of the angle of internal friction and cohesion of the soil involved are required for the design and development. Direct shear test is used to predict these parameters quickly. The laboratory report cover the laboratory procedures for determining these values for cohesion less soils. 

Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Compliance With Following International Standards:

ASTM D1833, AASHTO T193

 

Significance & Use

This test method is used to evaluate the potential strength of sub‑grade, sub‑base, and base course material, including recycled materials for use in road and airfield pavements. The CBR value obtained in this test forms an integral part of several flexible pavement design methods. 

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National / International Standards:

 IS: 2720 (Part XVI), IS: 9669

EIE Motorized California Bearing Ratio Test Apparatus determines the load carrying capacity in the laboratory when in place density and water contents are such that the degree of saturation is 80 % or greater, when material is cohensionless and coarse grained.

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following International Standards:

IS :2720 - Part 11 (1993) & IS : 2720 - Part 12(1981)


For determination of the shear strength parameters of a specimen tested in unconsolidated undrained triaxial compression without the measurement of pore pressure.   

Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Compliance With Following National Standards:

 (IS:2720 Part XI & XII)


For determining the shear strength parameters of saturated soils from triaxial compression shear tests conducted under consolidated undrained conditions with measurements of pore water pressures. 

Further details available on our website.


The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Compliance With Following National Standards:

IS: 2720 (PART XIV)


The equipment comprises a motorized vibratory table of size  75 mm x 75 mm, which operates on 230 Volts, single phase, A.C. Supply. 
Further details available on our website.


The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Compliance With Following National Standards:

IS : 2720 (Part 17)‑1986, IS : 11209‑1985, IS : 9198


To study the permeability characteristics of all type of soil samples (For both Re-molded as well as undisturbed specimen) under different conditions of Laboratory as well as in the field. 

Further details available on our website.


Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Universal OR Combination Permeameter is used for the purpose of Soil Testing. 

Further details available on our website.


The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Compliance With Following International Standards:

IS : 2720 (Part V), IS : 9259, BS 1377:2, ISO 17892-12

Available Models : 1. Motorised 2. Hand Operated

Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Compliance With Following International Standards:

IS 11196-1985

Applications:

Apparatus for determination of liquid limit of soils by cone penetration method. 

Also Available in various models such as : 1) Automatic Cone Penetrometer with Digital timer 2) Fully automatic Cone Penetrometer with Motorized up and down movement and timer 3) Digital readout Cone Penetrometer

Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Compliance With Following National / International Standards:

IS : 2720 (Part‑V), IS : 9259, BS 1377:2, ISO 17892-12

Construction Details:

• Will consists of a brass cup held on an adjustable bracket.
• The bowl can be adjusted for a fall, raised & dropped on a rubber of standard hardness by cam action.

Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Compliance With Following International Standards:

ASTM D7928-17

Details:

• Double walled
• Highly efficient model
• Aesthetic outer appearance
• Easy operation and hassle free maintenance
• The body of the bath is mounted on a sturdy angle iron frame with inner chamber consisting of thick polished stainless steel with cooling coil duly soldered on the outside of the same to ensure perfect cooling effect

Further details available on our website.


The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Soil Testing Equipment will consist of metallic cone with half angle of 15' -30 ±15' and 30.50 mm coned length. It will be fixed at the end of a metallic rod with a disc at the top of the rod so as to have a total sliding weight of 148± 0.5 gm. The total rod shall pass through two guides (to ensure vertical movement) fixed to a stand. Suitable provision will be made for clamping the vertical rod at any desired height above the surface of the paste in the trough. A brass trough 50 mm internal diameter and 50 mm depth will be provided as per IS specification resting on M.S.bars.

Ground Glass:

• 10mm thick and about 45 cm square or larger rough glass as per IS 2720 (Part V-1985) for mixing soil and water

Spatula:

• Flexible with blade about 8 cm long and 2 cm wide made from stainless steel material as per IS: 2720 (part V-1985)

Specifications:

• Rammer Weight: 10kg±10g
• Drop Height: 500mm
• Max. Penetration Depth: 6000mm
• Penetration Rammer Extent: 60°
• Penetration Rammer Angl

Compliance With Following International Standards:

IS:2720 (XXXI)


Used for the in-situ determination of the bearing capacity of soils used in road construction. The complete set is housed in a strong carrying case. 

Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Compliance With Following national Standards:

IS:2720 (XVI) and IS:9198


Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National and International Standards:

BS 1377:9, IS : 2720 (P-XXIX)

Applications:

This is used for determination of in-situ dry density of natural or compacted fine grained soil, free from aggregates.

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National / International Standards:

ASTM D-3080

In many engineering problems such as design of foundation, retaining walls, slab bridges, pipes, sheet piling etc. the value of the angle of internal friction and cohesion of the soil involved are required for the design and development. Direct shear test is used to predict these parameters quickly. The laboratory report cover the laboratory procedures for determining these values for cohesion less soils.

 Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Compliance With Following National / International Standards:

IS:2720 (Part XXXIX)/ IS 11593

The apparatus consist of :

• Load Frame Fitted with a motor, gear box & loading lever system. Shear Load Capacity : 50kN (5000kgf) Vertical Load
• Capacity : 50 kN/m2 , No. of Speeds : 72-ranging from 0.0014 mm/min to 10.16 mm/min. change gears : 12
• Shear Box assembly for square specimen size 30 x 30 x 15 cm, 1 off
• Plain gripper plates 2 off

Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Compliance With Following National Standards:

IS:2720 (Part XXXIX) / IS 11593


Also Availabe in different models 1.With Proving Ring and Dial Gauge 2. Electronic Controller with PC Software. 

Supplied with Load Frame, shear box assembly, set of weight, High sensitivity Proving Ring for shear load measurement, capacity : 30 kN (3000 kgf), Consolidation Dial Gauge 0.01 mm x 25 mm, Strain Dial Gauge 0.01 mm x 25 mm with magnetic spacer, etc. Suitable for operation on 415 volts, 50 Hz, 3 phase, A.C. Supply. Further details available on our website.




The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Compliance With Following National Standards:

 IS:2720 (Part 39) / IS 11593


Direct Shear Apparatus, Large, Motorized, Capacity 50 kN (5000 KGF). For testing sands, gravel, gravelly clays and clay-gravel for use in rolled fill embankments.  Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Compliance With Following International Standards:

IS:2720 (XVI) and IS:9198


Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Model Number : TM-239-F
Brass or stainless steel frame with S.S.wiremesh. Available in mesh size of 75 micron, 63 micron and 45 micron. Frame size 200mm dia X 200mm depth. 

Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

EIE4020 is Digital Static Plate Load Tester is an Automatic Evaluation Static Plate Load Tester according to DIN 18134, ASTM 1194,1195,1196, BS 1377, that provides output of Ev1 and Ev2 values. The EIE4020 is ideal for ongoing measurement of Ev1 and Ev2 Deformation Modulus of compacted layer [Elastic Modulus at second loading (EV2)] values during construction stages , including  Deformation Modulus EV2 of compacted layers 

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National / International Standards:

IS : 2720 (PART-XV) 

THREE GAUGE OR SIX GANG APPARATUS ALSO AVAILABLE. 



Consists of : Loading Unit, maximum capacity 20 kg/cm2 consisting of a loading yoke connected to a lever arm with a counter balancing adjustment and having a lever ratio of 1:10, the whole assembly being mounted on a steel frame stand

Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Compliance With Following International Standards:

ASTM D558, D559, D560, D698, D1557; AASHTO T99, T134, T135, T136, T180

The EIE Compactor automatically compacts soil specimens, thereby eliminating the laborious hand compaction method. The height and weight of the hammer is adjustable to suit test requirements.. 

Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

 

Compliance With Following International Standards:

IS:2720 (Part XVI)

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Compliance With Following International Standards:

IS:9669


150 mm dia X 175 mm high with extension collar and perforated base plate.Made of Mild-Steel. Further details available on our website.


Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following International Standards:

IS :2720(PART-XV)1986, IS 12287 - 1988

Also available in Single Gang. As per IS : 2720 (PART-XV).

Supplied with Loading Unit,  60 mm dia Consolidation cell - 3 Nos, 3 Set of weights to give a pressure of 10 kg/cm2 on 60 mm specimen, LVDT and Digital indicator with USB interface for data logging. 

Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Compliance With Following National  Standards:

IS: 2720(Part 41)1977 / IS: 11550 (1985). 


Available With / Without Proving Ring and Dial Gauge and Digital Model. 

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National  Standards:

As per IS 2720 (Part VIII) and IS:10074-1982. 

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National and International Standards:

IS : 2720 (PART IV), AASHTHO T88, ASTM D422, BS : 1377‑2


Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National and International Standards:

ASTM D422, AASHTO T88, IS:2720 (PART IV)1985, (IS 2720, PART-IV, 1985, section 5.2.1.2)

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following International Standards:

IS :2720 (PART-XV) 1986, IS 12287 - 198

Also available in Single Gang.

Consists of : Loading Unit, maximum capacity 20 kg/cm2 consisting of a loading yoke connected to a lever arm with a counter balancing adjustment and having a lever ratio of 1:10, the whole assembly being mounted on a steel frame stand. Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Compliance With Following National Standards:

 IS:2720 (Part IV)


The Apparatus consists of a sliding panel which moves up and down by means of a screw allowing Anderson Pipette fixed to it to be raised or lowered vertically. 

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following International Standards:

IS:2720 (Part VI), IS:10077, BS : 1377, ASTM D427

Shrinkage limit is the maximum water content at which a reduction in water content does not cause an appreciable reduction in volume of the Soil Mass.

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following International Standards:

IS-2720 (PART-VII), EN ISO 17892 (PART 12)

The plastic limit is defined as the lowest moisture content of a soil that will permit a sample to be rolled into threads of 3 mm diameter without the threads breaking. The apparatus required is simple yet effective.

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Hydraulic Jacks are of multipurpose utility. Available from 100 KN to 2000 KN Capacity. Motorized version also available

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.