EIE Instruments Private Limited

Compliance With Following National / International Standards:

Application :

1. For measurement of straightness and squareness.
2. For measurement of flatness / warp-age
3. Tiles size : 100 x 100mm to 800 x 800mm
4. Material of Construction : Mild steel duly powder coated

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance standards

• EN ISO 10545 -2, IS 13630 (Part 1)

• One single instrument can make all the measurements – Rectangularity (Orthogonality), Flatness, Warpage & Straightness of sides as suggested by the standard.
• 06 different digital LVDT Transducers to offer precise and accurate measurement results with very little deviation factor.
• Simple, easy and less time consuming LVDT fixing system.
• Readings from all 06 LVDT transferred to central controlled display screen, where an operator can analyse the generated results in 06 different channels.
• An operator can make easy & effortless comparison between each of the generated readings.
• Tare facility for each LVDT is available in respective controller channel.
• Accuracy : ± 0.01 mm (1/100 mm)
• Can measure : 100 x 100 to 600 x 600 mm tile sizes
• Supplied complete with locating studs and Allen keys
• Aluminum Ergal hard anodized ground working plate
• Stainless Steel/Mild Steel Supporting structure
• System can also be supplied with dedicated software part for data acquisition and analysis purpose (Available at extra cost - see optional accessories)

Selection Guide

Compliance With Following National / International Standards:

Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Compliance With Following National / International Standards:

Introduction:

• Electro-Mechanical Design, quite and vibration free operation, Rate of loading controlled through AC drive.
• Capacity    : 1000 kgf
• Least Count : 0.1 Kgf
• Accuracy    : 0.2% of Full Scale

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National / International Standards:

ASTM E303, BS EN 1097-8

The instrument is used to measure the resistance value of the asphalt pavement marking, stone, or other material (specimen) and to assess anti-sliding ability of the road and the road surface material (specimen) in wet or humid conditions. Used to determine friction coefficient on flat, cambered or gradient road surface like highway pavement, city road pavement, airport track.

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

SIEVE SHAKER- ROTAP MODEL FOR 20 CM DIA SIEVES WITH DIGITAL TIMER, make process of sieving simpler and quicker. This produces circular shaking of the sieves. At the same time the sieves are tapped simultaneously. Produces Circular (280‑300 RPM approx) and tapping (140‑160 RPM approx) motion with a uniform mechanical action which ensures accurate and dependable test results.

Also availabe for 30 CM Dia Sieves and 45 CM Dia Sieves

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National / International Standards:

EN ISO 10545-10, IS 13630 (Part-3)

For moisture expansion test of ceramic tiles. 

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National / International Standards:

EN ISO 10545‑5, IS 13630 (Part‑14)

The test is recommended for tiles to be used in floors where impact resistance is considered especially important. 

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

A solution of the salt is aspirated into the LPG-AIR flame. The vapor takes up energy from the flame and emits the wavelength Characteristic color of the element being tested. The intensity of emitted light is proportional to the concentration of the metal Ion in the solution.

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National / International Standards:

ISO 10545-8

This instrument is used to measure the thermal expansion of ceramic as per the codal requirement up to 1000° C. The expansion will be measured at 1 micron resolution.

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National / International Standards:

IS : 13630 (Part - 1), EN ISO : 10545 (Part - 2)

Suitable For measurement of Diagonal Linearity for Tile size (cm) : 45 x 45. Please specify your required tile size measurement at the time of order.

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National / International Standards:

IS : 13630 (Part 12), ISO 10545 (Part ‑ 6)

The ability of unglazed tiles to resist deep abrasion is determined by holding the tile under test in a vertical plane and pressing it against a steel disc rotating at a specified speed. 

Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Compliance With Following National / International Standards:

For water absorption test of ceramic tiles. The tiles will be placed vertically in the slots provided to conduct the water absorptions characteristic test.

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National / International Standards:

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Applications:

Used for rapid grinding of frits, glaze, color and various compounds for laboratory tests. Indispensable for ceramics manufacturers, dye works, cement factories, research laboratories, pharmaceutical companies, art schools etc.

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National / International Standards:

EN ISO 10545-11, ASTM C424, IS 13630 (Part-9)


Further details available on our website.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Compliance With Following National / International Standards:

Applications:

This is used for determination of resistance to wear for Cement & Concrete flooring tiles.

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National / International Standards:

IS : 13630 (Part  11), ISO : 10545 (Part  7) - Matching the standard with deviations

The ability of glazed tiles to resist surface abrasion encountered in everyday use is determined by abrading the glazed surface either with a wet abrasive media consisting of steel balls of 1 to 5 mm diameter, aluminum oxide abrasive powder, and distilled water; or with a dry abrasive media consisting of porcelain cylinders and Aluminum Oxide Abrasive Powder.

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National / International Standards:

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National / International Standards:

Purpose:

For water absorption test of ceramic tiles. The tiles will be placed vertically in the slots provided to conduct the water absorption characteristic test.

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National / International Standards:

IS : 13630 (Part  11), ISO : 10545 (Part  7)

The ability of glazed tiles to resist surface abrasion encountered in everyday use is determined by abrading the glazed surface either with a wet abrasive media consisting of steel balls of 1 to 5 mm diameter, aluminum oxide abrasive powder, and distilled water; or with a dry abrasive media consisting of porcelain cylinders and Aluminum Oxide Abrasive Powder.

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance standards

• EN ISO 10545-3, EN ISO 10545-9, IS 13630 (Part-2) 

• Double walled in construction
• Inner chamber made of stainless steel material. 
• Lid made of acrylic material for sealing application.
• Exterior body is made of Mild steel material, which is powder coated in attractive shades.
• Bath comprises of essential accessories such as Vacuum pump, Vacuum timer, Inlet water connection, Solenoid valve for automatic inlet of water and alarm to establish vacuum within the chamber to determine porosity, apparent relative density and water absorption of tiles.
• Internal Overall size    : 400mm dia x 450 mm height
• Volume                     : 56.5 Liters
• Operates on              : 230 Volts, 50 Hz, Single Phase, AC Supply
• Accommodates          : Test specimen up to 300 x 300mm size
• Vacuum pump           : Oil free
• Vacuum range           ≥ 690 mm of Hg (≥0.095 mpa)
• Vacuum pump time  : 0-99 min 59s
• Water inlet time         : 0-99 min 59s 
• Supplied with vertical removable stand to place 300 x 300 mm ceramic tiles.

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National / International Standards:

Introduction:

• Electro-Mechanical Design, quite and vibration free operation, Rate of loading controlled through Servo Motor & Servo Drive.
• Capacity    : 1000 kgf
• Least Count : 0.1 Kgf
• Accuracy    : 0.2% of Full Scale

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National / International Standards:

EN ISO 10545‑9, ASTM C484, IS 13630 (Part‑5)

Also available in various accomodation tile size : 1) 600 x 600 MM 2) 1000 x 1000 MM 3) 1200 x 1200 MM 4) 800 x 1200 MM

Principle

Determination of resistance to thermal shock of a whole tile by cycling 10 times between the temperatures of cold water and a temperature just above that of boiling water. Usually tests are carried out between 15 °C and 145 °C.

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National / International Standards:

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer. 

• Ceramic tiles and plates
• Cement prisms and mortar prisms
• Plaster prisms and gypsum prisms
• Concrete roof tiles

• Capacity : 50/500 kgf or 100/1000 kgf at 6 Kg/cm2.
• Least Count : 1.0 Kgf (Higher scale) 0.1 kgf (lower scale)
• Accuracy : 0.2% of Full Scale