Concrete Testing Equipment

Product Details:

The Digital 2000 kn Compression Testing Machine has been designed to meet the need for a simple, economic and reliable means to test concrete for its compressive strength. The design expressive of simplicity, both of construction and operation, makes the machine easy to use and maintain. The unit is compact, making it useful for site and Laboratory applications. The digital machines are provided with a pace rate controller, to enable maintain a constant of loading.

Features:

• High stability four column load frame
• Each frame tested for stability and alignment to avoid tension failure during a test and to ensure centre loading.
• Standard Platens for 3 X 6/ 4 X 8 and 6 X 12 cylinders included.
• A precise large diameter spherical upper platen for optimum results
• Variety of optional accessories for cubes, blocks, bricks and flexure test available
• Motorized hydraulic power pack or pumping unit with rapid approach and automatic over load protection
• Comes standard with safety Guards on all four sides.

Other Details:

• The Complete unit comprises a Loading Unit which is of fully welded or two pillar model construction having a cross-head with a spherical seated platen. The lower platen is attached to the top of the piston. The Loading capacity is of 2000 KN, Cubes up to 200 mm & Cylinders up to 150 mm Dia X 300 mm Height can be tested using the appropriate spacers.
• Pumping Unit with choice of compact power pack attached closely to the loading unit or separate hydraulic pumping unit, attached to the loading unit by high pressure hydraulic flexible hose pipe. The pump facilitates rapid approach of the platens for daylight closure and also provides comprehensive control over the application of load. A control valve provides fine control over the loading rate for accurate pacing.
• Maximum load is held and retained for approx. 15 min, unless cancelled, using the panel mounted reset switch. Pace rate set for running the test can be maintained manually.

Specifications:










Note : Price will be change as per specification.

Additional Information:

• Item Code: EIE-TM-42D

Product Details:

Compression Testing Machine has been designed to meet the need for a simple, economic and reliable means to test concrete for its compressive strength. The design expressive of simplicity, both of construction and operation, makes the machine easy to use and maintain. The unit is compact, making it useful for site and Laboratory applications. The digital machines are provided with a pace rate controller, to enable maintain a constant of loading.

Features :

• High stability four column load frame
• Each frame tested for stability and alignment to avoid tension failure during a test and to ensure center loading
• Standard Platens for 3 X 6/ 4 X 8 and 6 X 12 cylinders included.
• A precise large diameter spherical upper platen for optimum results
• Variety of optional accessories for cubes, blocks, bricks and flexure test available
• Motorized hydraulic power pack or pumping unit with rapid approach and automatic over load protection
• Comes standard with safety Guards on all four sides.

Other Details:

• The Complete unit comprises a Loading Unit which is of fully welded or two pillar model construction having a cross-head with a spherical seated platen. The lower platen is attached to the top of the piston. The Loading capacity is of 2000 KN, Cubes up to 200 mm & Cylinders up to 150 mm Dia X 300 mm Height can be tested using the appropriate spacers.
• Pumping Unit with choice of compact power pack attached closely to the loading unit or separate hydraulic pumping unit, attached to the loading unit by high pressure hydraulic flexible hose pipe. The pump facilitates rapid approach of the platens for daylight closure and also provides comprehensive control over the application of load. A control valve provides fine control over the loading rate for accurate pacing.
• Maximum load is held and retained for approx. 15 min, unless cancelled, using the panel mounted reset switch. Pace rate set for running the test can be maintained manually.

Controller is having following features:

• Indicating four value at a time as follows.
• Current load on the sample in KN.
• Load per unit area in kg./cm square.
• Load per unit area in N/mm square.
• Direct display of maximum load retention.
• It is having facility to insert the sample size, e.g
• If sample of cube size is 150 mm x 150 mm x 150 mm , the value can be entered in load indicator so that we can directly get load per unit area continuously on line, so no calculation for unit load require.
• We can store value of last 10 memories.
• We can measure rate of loading per minute by simply pressing one button.
• It can be connected with computer for auto report generation as well as to derive graph of load versus time.
• Motor can be directly start or stop by load indicator.
• It disconnects the current to the motor at the time of overload to specified maximum load.
• The range of load indicator can be set automatically from 50 kn to 2000 kn according to the requirement of range.
• Facility for auto-calibration by default value.
• The controller is having least count of 1 KN. (I am planning to upgrade for 0.5 KN)
• It is having facility for bar graph which will automatically blink to its full length according to the rise of rate of loading

Note - Price will be change as per specification

Product Details:

EIE Moulds are made of high quality metal, strong enough to resist distortion & retain their shape, size even under rugged conditions. We offer moulds of different sizes and weight for cube, beam & cylindrical moulding required for compressive strength testing.

 

 

 

 Benefit of plastic mould

• Rigid to maintain fixed dimentions.
• Light weight.
• Scratch proof.
• No need for nut-bolt.
• Easy to use.

Note - Price will be change as per specification

Additional Information:

• Item Code: EIE-TM-110

Product Details:

Hand operated is ideal for the mobile van or for the place where power is not easily available. Here, you have to pump the machine with the help of your hand and observe the reading on the gauge. Following are the salient featuresof the hand operated CTM is as follows.

• Specially designed dual speed hand pump for easy pumping.
• Pressure gauge with red needle to record the reading at the failure point.
• Robust and rugged product.
• Least count will be 0.5% of the full load.
• Accuracy will be 2% of the applied load.
• 20% over load safe.
• Following capacity available in this category.
• Digital dial gauge in hand operated variant also available.

Note - Price will be change as per specification

Product Details:

Digital Compression Testing Machine has been designed to meet the need for a simple, economic and reliable means to test concrete for its compressive strength. The design expressive of simplicity, both of construction and operation, makes the machine easy to use and maintain. The unit is compact, making it useful for site and Laboratory applications. The digital machines are provided with a pace rate controller, to enable maintain a constant of loading.

Features :

• High stability four column load frame
• Each frame tested for stability and alignment to avoid tension failure during a test and to ensure center loading
• Standard Platens for 3 X 6”/ 4 X 8” and 6 X 12” cylinders included.
• A precise large diameter spherical upper platen for optimum results
• Variety of optional accessories for cubes, blocks, bricks and flexure test available
• Motorized hydraulic power pack or pumping unit with rapid approach and automatic over load protection
• Comes standard with safety Guards on all four sides.

Note - Price will be change as per specification

Product Details:

Heating & Cooling System

• Long lasting SS tubular heaters used as heating element. The stainless steel fins provided to ensure better heat transfer.

• Hermetically sealed compressor CFC free compressor (134 A gas) coupled with evaporation coil and condenser

Control

• Microprocessor based Digital Auto-Tune PID temperature and direct RH digital controller. Humidity directly measured in % RH by electronicsensor.

Technical Specifications

• Construction : Sandwich type.
• Inner chamber : Stainless steel S.S.-304 Grade.
• Exterior body : Mild steel.
• Paint : Powder coating in attractive shades.
• Thermal insulation : 75mm to prevent thermal loss.
• Chamber Dimension : 600 mm X 600mm X 600mm.
• Chamber Volume : 200 liter.
• Optimum Performance : with 150 kg of Concrete load.
• Temperature range : 5°C above Ambient to 60°C.
• Humidity range : Ambient to 80% RH(Maximum carbonation takes place between 40% RH to 80% RH ).
• CO2 Concentration : Atmosphere concentration to 4.5% with accuracy 0.01%. (Maximum solubility of CO2 in water is 4%).
• Controller : Digital PID Temp & RH Controller

Safety Features

• High temperature safety cut off.
• Low water level boiler cut off.
• Electrical overload cut off.
• Time delay for compressor switch ON.
• Electrical circuit breake.

Applications

It is used for testing the durability of concretes under an environment of constant temperature, humidity and CO concentration, which is a 2 special apparatus for carbonation test of concretes.

Salient Features

• Double wall construction.
• Interior fabricated from high grade stainless steel (S.S.304).
• Exterior body made of Mild steel material - which is duly.
• powder coated in attractive shades.
• Double walled metal door with sponge - type silicon gasket
• for air-tight sealing.
• Chamber illumination is accomplished by Fluorescent light
• with door switch.
• Cord wire duly tested and inspected with stress factor
• as per CE standard.
• Electric Motor located at the back side of unit, protected
• with safety cover to avoid accident.
• Standard motor of reputed Make.
• User friendly and tactfully designed chamber door and
• locking mechanism.
• Aesthetic outer appearance and high quality.

Air Circulation

Temperature is maintained by a quiet running blower circulation air throughout the chamber. Forced air circulated vertically down and re circulated throughout the chamber for uniform temperature and humidity.

Note - Price will be change as per specification

Product Details:

Introduction:

• Although generally not such an important property of concrete than compressive strength, tensile strength values are often important to know when the concrete used free of reinforcement and may be subjected to some tensile force. The test method essentially involves applying a load at the centre of a beam of concrete supported at its ends. The load required to break the specimen is then recorded.

Specification:

• The machine consists of a motorized load frame. The lower platen has two rollers, the distance between which is adjustable. For 150 mm x 150 mm x 700 mm beam, the centre distance between the rollers is 600 mm, while it is 400 mm for beams of size 100 mm x 100 mm x 500 mm. The upper platen has also a pair of rollers whose distance adjustable. It is 200 mm centre to centre, for 150 mm x 150 mm x 700 mm size beam and 133 mm for 100 mm x 100 mm x 500 mm size beam. Total capacity of the machine is 100 KN. 150mm dia pressure gauge of 0-100 KN x 1 KN least count to indicate load is fixed on the load frame.
• A separate electrically cum hand operated pumping unit housed in a cabinet is supplied. On/Off switch and a slow/fast lever to control rate of loading are fitted on the front panel of the pumping unit. A facility for hand operation is provided. A micro switch and relay fitted inside the pressure gauge protect the unit from over loading.
• Hand operated version consists of a load frame. A small hand pumping unit is attached to the load frame. Since this is a hand operated light weight machine. It is useful for field laboratory also.

Note - Price will be change as per specification

Product Details:

• Pumping will be electrical.
• Two speed hydraulic pump.
• Least count 0.1 kN.
• Accuracy 1% of the applied load.
• Over load cut off.
• Over voltage protection.
• 2 Direct reading in N/mm .
• Saving of last 10 reading.
• Saves data in USB drive (optional).
• Computer connectivity possible (optional).
• Manual pace rate controllable with the help of star graph.
• Displays actual pace rate on the screen.
• Auto stop of the machine on the failure of the sample.
• Controller with back light.
• Auto recalibration of the machine (password protection).
• Password protected calibration.
• 20% over load safe.
• In built printer option available (optional).
• PC link software (optional).

Product Details:

The manhole cover testing machine is design as per is 12592. The machine is capable of measuring following.

• Compressive strength
• Permanent set (displacement)

The machine will consist of two units.

• Pumping unit
• Load frame

Pumping unit:

• The pumping unit will work on three phase,440 volts.
• The pumping unit will be compact, filled with hydraulic oil.
• The pumping unit will have two valves.
• Pressure release valve
• Pressure control valve
• The pressure release valve will facilitate building and release of the pressure.
• The pressure control valve will allow to control the pace rate of the machine.
• The pumping unit will have digital read out, showing actual load, peak load and permanent set .
• The pumping unit will be equipped with pressure sensor to give accurate reading of compressive strength.
• The accuracy of the pumping unit will be + or   1% and will give  resolution in 0.5 kn.   
• There will be sensor to find out the  permanent set of deformation in the manhole cover.
• The pumping unit will have over load protection which will trip the machine in case of over load.
• The machine also have facility of auto re???calibration of load and  permanent set. 

Note - Price will be change as per specification

 

 

 

 

 

 

 

 

 

 

 Load frame :

 

• The load frame will be fully bolted with high speed and hardened bolts which will be able to take a load of 500 kn.
• The load frame will able to accommodate manhole cover of 1000 mm  x 1000 mm size.
• The machine will be supplied with the plate to place the manhole cover. The plate will be hardened and properly shaped.
• The hydraulic jack of the machine will be provided on the top of  the machine which will be able to slide up down with the help of  the handle. The ram dia of the jack will be 110.00 mm
• The load frame will be connected to the pumping unit with the help of hose pipe.
• The machine will be supplied with operation manual and calibration certificate.

Product Details:

We are leading manufacturer and traders testing equipment of various type.

As per IS:1199. Consist of Slump Cone, base plate and graduated Tamping rod.

APPARATUS :

MOULD: The mould for the test specimen will be in the form of frustum of a cone having the following internal dimensions

• Bottom diameter: 20 cm
• Top diameter: 10cm
• Height: 30cm

Additional Information:

• Item Code: EIE-TM-165
• Production Capacity: 500 per annum
• Delivery Time: 3-4 week after received of confirm order
• Packaging Details: Wooden packing with strong base

Product Details:

We are leading manufacturer and trading testing equipment of various types.

Details of apparatus

• Hydraulic Jack hand operated with separate pumping unit. The pumping unit is connected to the hydraulic jack by means of a flexible connecting pipe  5 meter long
• The jack is fitted with lifting handles for easy transportation. 
• The approximate lift of the ram is 150 mm. 
• The pumping unit is a single plunger type with detachable handle. 
• The unit is fixed on a channelled base, which is fitted with lifting handles. A pressure release valve is provided on the pumping unit.
• The load is indicated on a 15 cm dial hydraulic pressure gauge of appropriate capacity, which can be detached from the pump when not in use. 
• The least count of the calibrated dial will be according to the capacity of the gauge (Normally 100 divisions for full capacity).
• Capacity : 25 ton (250Kn)
• Supplied With Calibration Certificate.

 Also we have manufacturer

• PULLOUT TEST APPARATUS - 50 TON (500 KN)

Note :- Price will be change as per specification

Product Details:

It consists of cylindrical spring housing with a plunger attached to the top of the spring. Penetration needle is attached to the other end of the spring housing. The plunger is graduated in 1 kg divisions, to a maximum capacity of 60 kg, which can be read with respect to the top end of the spring housing. A set of six 2 needle points with areas of 645, 323, 161, 65, 32 and 16 mm are provided. Supplied complete in a carrying case.

Note - Price will be change as per specification

 

Additional Information:

• Item Code: TM-126

Product Details:

We Manufacture All Concrete Testing  Equipment

Additional Information:

• Pay Mode Terms: D/A

Product Details:

We are leading manufacturer and trading testing equipments of various Types

Compliance with following International Standards

IS : 3085

Permeability cell consisting of 3 Nos. Gunmetal cylinder with a ledge at the bottom and flange at the top, one removable cover plate and a funnel & an air bleed valve is provided on the cover plate , all made of gun metal. A control panel fitted with a water reservoir, graduated transparent tube, an inlet valve, pressure regulator, pressure gauge 0-15 kg sq.cm, an air bleed valve, a drain cock for water reservoir and a shut-off valve for the permeability cell, but without Air Compressor and specimen casting cylindrical  mould

Product Details:

We are leading manufacturer and trading testing equipment of various type.

Technical Specification

Product Details:

This apparatus is used to assess the surface absorption characteristics of concrete.The rate of flow of water per unit area into a concrete surface when subjected to a constant head of 200 mm is measured. The unit consists of a capillary tube mounted on a scale, a water reservoir & connecting tubes. Easy to use, mounted on a stand.

Note - Price will be change as per specification

Product Details:

We are manufacture and trading of ultrasonic concrete tester
equipments

Note - Price will be change as per specification

Product Details:

Salient Features:

• EIE - thermal conductivity test apparatus by guarded hot plate method is based on the steady-state method and is able to measure 30 cm x 30 cm test samples having thickness ranging from a few millimeters to 10 cm.
• Design concept of apparatus according to Indian Standard (IS : 3346-1966) and applicable ASTM Standard ASTM C177
• External body is manufactured from Mild steel material, which is powder coated in attractive shades
• Specimen to be tested is placed in chamber such that it gets sandwiched between two heat flux sensors as per ASTM C177 guidelines.
• Unit is equipped with 5 Different Thermocouples for temperature measurement on either side of test specimen and guard Heaters (In total 10 Thermocouples).
• Cooling is obtained by in-built mini-chiller system, which provides efficient cooling temperature as per test requirement.
• Chiller system composed of condenser, compressor and cooling coil with CFC free refrigerant.
• Complete panel mounted electrical controls and measurement. All control accessories are within reach.
• Equipped with Digital Temperature Indicator Cum Controller to precisely measure and indicate the temperature values
• Instrument will also be fitted with Thermal Printer to print the test results instantly on site.
• System will also be supplied with 16 channel data logger to log the temperature data of all 10 thermocouples
• Instrument is also supplied with Dedicated Jockey, which facilitates an operator to manually move top plate upward or downward with operation ease
• The complete instruments can also be supplied with dedicated PC Software for to log, modify and analyze the measurement results (Optional – see optional accessories)
• Suitable for industrial applications such as Thermal conductivity measurement of AAC Blocks, Concrete slabs, Dimensional stones, marbles etc.

Note - Price will be change as per specification

Product Details:

Accurate :

• Responsive transducers provide fast, accurate readings
• Certificate of Calibration showing traceability to NIST or PTB included
• Proven non-destructive technique conforms to ASTM D6132 and ISO 2808

 Versatile :

• PosiTector body accepts all PosiTector probes easily converting from a coating thickness gage to a surface profile gage, dew point meter or wall thickness gage
• Rip display enables right-side-up viewing
• Uses alkaline or rechargeable batteries (built-in charger)

 Powerful :

• Continually displays average, standard deviation and min/max thickness
• USB port for connection to a Mac/PC and to supply continuous power
• Every stored measurement is date and time stamped
• PosiSoft USB Drive-stored readings, graphs and screen captures can be accessed using universal PC/Mac web browsers or file explorers. No software required.

Product Details:

Concrete Moulds Vibrating Table 

Proper compaction of cement concrete while casting specimens for compression testing is essential to achieve higher compressive strength. EIE Vibrating Table is ideally suited for this purpose. The table top is suitable to hold cube moulds and stops along its edges to prevent moulds from sliding off

the table during operation.

Note - Price will be change as per specification

Product Details:

Compliance Standards

ASTM C666

Applications

The Rapid Freeze Thaw Cabinet is used to measure the resistance of concrete to deterioration caused by repeated cycles of freezing and thawing in water. The system is designed to test up to eighteen 3" x 4" x 16" (76 x 102 x 406 mm) concrete specimens simultaneously, with one being a control. Fully automatic operation frees operator to perform other lab duties.

 Salient Features

• Allows users to establish field control using correlations between concrete strength and durability
• Permits the evaluation of variables in concrete properties and conditioning.
• Useful in the evaluation of the durability of aggregates, as well as the properties of ad mixtures.
• Horizontal stand alone model with mobility on castor wheels
• Fully complies with ASTM C666 Standard
• Fully automatic operation (PROCEDURE A) frees user to perform other lab activities
• For PROCEDURE B, User will have to manually pour the water inside the test container.
• Exterior body is fabricated from Stainless Steel – 304 Grade material
• Internal chamber is also manufactured from Stainless Steel S.S. – 304 Grade material.
• Cooling coil is incorporated within inner chamber to achieve desired temperature below zero degree Centigrade
• Supplied with 8 different corrosion resistant stainless steel test containers
• Can accommodate 8 different test specimens
• Can perform 8 Freeze-Thaw cycle during 24 hours of time
• 7” touch screen HMI & PLC Control system
• HMI System facilitates in-built 24/7 data logger system to accurately maintain record of control specimen temperature throughout the testing period
• User can set min/max temperature extremities as per test cycle requirement
• User defined no of cycles as per ASTM C666 Requirements
• Produce beep sound on completion of cycle
• CFC Free Emerson/Danfoss/Kirloskar make refrigeration system
• User can set Ramp & Soak rates as per test requirements
• Dedicated PC Software to log, modify and analyze the generated test results
• Supplied complete with instruction manual and calibration certificates
• Operates on 230 volts, 50 hz, Single phase, AC Supply

Note - Price will be change as per specification

Product Details:

Salient Features:

• Rock/stone/tile cutting Machine.

• Floor type
• Have ability to cut stone, Tile, cement- concrete cubical as well as cylindrical specimens.
• It will have 450 mm diameter diamond impregnated blade having effective cutting depth of 150mm.
• It will be assembled on suitable sturdy steel frame work with all necessary arrangements to operate very safely and smoothly.
• Operation under electric supply, 440 Volt, 50Hz, AC Supply.
• Installed with 5 HP Motor.
• Separate fused power supply and switching

• Installed with self-contained submersible pump for circulation of water.

 

Note : Price will be change as per specification

Product Details:

Application:

• This system is designed and made as per industrial standards T 0630-2011, Accelerated Aging Test for Bitumen by Pressure Aging Vessel in JTG E20-2011, Standard Test Methods of Bitumen and Bituminous Mixtures for Highway Engineering and SH/T 0774-2005 Standard practice for accelerated aging of asphalt binder using a pressurized aging vessel (PAV).
• It also refers to standards ASTM D6521 and AASHTO PPI.
• It covers the accelerated aging (oxidation) of asphalt binders by means of pressurized air and elevated temperature.                                     

Characteristics: 

• This system is composed of PAV pressuring aging vessel.
• This system is equipped with a PC. The high pressure aging test is controlled by a PC. All test procedures can be controlled by a PC.

 

Optional Accessories at Extra Cost:

1. 3 HP Air Compressor with 50 Ltr. Tank @ Rs.65,000.00

Note : Price will be change as per specification

Additional Information:

• Item Code: EIE-PAV

Product Details:

 

 

 

NOTE: Mixer with bigger capacity and with variable controllable RPM also available. Please contact us for more details of the same.

Additional Information:

• Item Code: EIE-TM-57