General Laboratory Equipment

Product Details:

Salient Features

• Ceramic fiber wool insulation to reduce weight and size of furnace.
• Less heat up time is
• Nominal heat-loss resulting in power saving
• Built in vent port for removal of noxious gases etc.
• Provision of hole with cover in the furnace door to insert temp sensor for calibration purpose
• Construction : CRC sheet - attractively powder coated
• Max Temperature : 1200°C
• Working Temperature : 1150°C
• Temperature control : Dual display microprocessor based Digital temperature indicator cum controller
• Temperature Sensor : K - type sensor
• Heating elements : KANTHAL A-1 wire in coil form placed in the Elements ribs & easily replaceable
• Circuit Wiring : As per CE Norms
• Operation on : 220/230 Volts, Single phase, AC Supply

• Selection Guide

  Inner chamber size (mm) (H x W x D)	Power consumption (Kw)	Approximate Weight (Kgs)	Digital Model Numbers (EIE-108DP)	Digital GMP Model Numbers (EIE-108DG)
  225 x 100 x 100 (9” x 4” x 4”)	1.5	60	EIE-108DP2.25	EIE-108DG2.25
  250 x 125 x 125 (10” x 5” x 5”)	2.0	71	EIE-108DP4	EIE-108DG4
  300 x 150 x 150 (12” x 6” x 6”)	3.0	82	EIE-108DP7	EIE-108DG7
  300 x 200 x 200 (12” x 8” x 8”)	5.0	115	EIE-108DP12	EIE-108DG12
  450 x 225 x 225 (18” x 9” x 9”)	6.0	125	EIE-108DP23	EIE-108DG23

   

Note -: Price will be change as per specification

Product Details:

Oil bath (Round) Digital model Selection Guide

Oil bath (Rectangular) Digital model Selection Guide
Price will be change as per specification

Additional Information:

• Item Code: EIE-407

Product Details:

Introduction

Used to monitor and digest the wastewater influent and effluent, industrial process water, blend of chemicals and more. Primarily used by Pollution Control Labs

Construction Details

• Double walled construction
• Effective insulation for minimum heat loss 
• Outer cabinet of mild steel material duly powder coated 
• Aluminum Block with holes is used to hold 6 nos COD tubes. 
• Aluminum Block is heated to maintain temperature up to 180° C 
• Solid state Digital Temperature Controller, appropriate heater & insulation selection assure uniformity in all the samples. 
• Selectable timer up to 120 min/h alarm is provided to set the digestion period (Refluxing). 
• After digestion, analyze the sample with titrimetric method. 
• Supplied without chemicals and accessories for Titration (Has to be ordered separately) 
• Supplied with 6 sets of Glassware

Technical Specifications

• Temp Range : Above ambient to 180° C or higher
• Temp Resolution : 0.1° C 
• Display : Digital 12mm Red LED
• Control : Digital Electronic Temperature Controller
• Heater Rating : 750 Watts
• Sensor : PT-100
• Timer : Selectable 15, 30, 45, 60, 90 or 120 minutes with alarm 
• Hole Size : 40mm Diameter x 80mm Depth
• Glass Tube : 38mm diameter, 06 no (2 x 3 rows)
• Sample Volume : 20 ml Each
• Overall size : 21 x 12 x 11"
• Net weight : 21 kilograms

Selection guide

Note : Price will be change as per specification

Product Details:

Applications

• Particle size distribution

 Salient Features

• Ceramic fiber wool insulation to reduce weight and size of furnace.
•  Less heat up time is
•  Nominal heat-loss resulting in power saving
•  Built in vent port for removal of noxious gases etc.
•  Provision of hole with cover in the furnace door to insert temp sensor for calibration purpose
•  Construction : CRC sheet - attractively powder coated
•  Max Temperature : 1000°C
•  Working Temperature : 900°C
•  Temperature control : Dual display microprocessor based Digital temperature indicator cum controller
•  Temperature Sensor : K - type sensor
•  Heating elements : KANTHAL A-1 wire in coil form placed in the Elements ribs & easily replaceable
•  Circuit Wiring : As per CE Norms
•  Operation on : 220/230 Volts, Single phase, AC Supply
•  Available in following sizes

Selection Guide

Note - Price will be change as per specification

Product Details:

Specification:

• Sterilization Temperature: 126-129

Note : Price will be change as per specification

Product Details:

Salient Features

• Electrically heated unit 
• Comprises of single mild steel tubular stand for both digestion & distillation parts
• Stand is equipped with 02 different heating shelves, one above the other.
• Complete with heating box and fume duct. 
• Specially designed fume duct to totally avoid leakage of Fumes
• B-24 cone adapters openings suitable to fit Kjeldhal flasks having B-24 Sockets
• Equipped with 500 watts heaters - in both the heating shelves.
• Individual energy regulator for each heater in both the heating shelves 
• Distillation part is also provided with brass condenser rack and water circulation systems.
• Both distillation part and digestion part will be supplied with suitable clamps 
• Operates on 230 Volt, 50 Hz, Single Phase, AC Supply

Optional Accessories

• Glass parts for digestion and distillation units (1 Set - 3 numbers glass parts)
• Glass parts for digestion and distillation units (1 Set - 6 numbers glass parts)

Available in following sizes

Note : Price will be change as per specification

 

 

Product Details:

Salient Features

• Semi Automatic operation;
• Manual steam exhaust at the end of test cycle
• Single chamber for steam and water
• Working chamber fabricated from S.S. – 304
• Exterior body is fabricated from MS Material
• Powder coated in attractive shades
• Lid, flange & bottom sheet also made of stainless steel.
• Joint less silicon gasket
• Heavy duty industrial flange heater (As per selected size)
• Microprocessor based Digital Temperature Indicator cum Controller
• PID Controller Controls temperature/pressure precisely at set value
• User adjustable in-built digital timer
• Pressure range                   : 15 to 22 PSI, factory set at 15 PSI
• Temperature Range          : 121°C to 125 °C
• Temperature Accuracy     : ± 0.5 °C
• Temperature sensor         : PT-100
• Lid fitting pressure gauge : 0-30 PSI
• Hydraulically tested at      : 60 PSI
• Safety valves                       : 02 Mechanical Valves, 01 Manual release valve
• Supplied with Calibration certificate with traceability
• Provided with DQ, IQ, OQ, PQ documentation
• Validation ports provided for temperature mapping as standard supply. (On customer request)

Fully Automatic models Available in following sizes

Semi Automatic models Available in following sizes Note - Price will be change as per specification.

Product Details:

Stainless Steel Oil Bath made of stainless steel 316, argon welded .Temp range 50°C to 300°C , controlled by Digital Temperature controller. Heaters placed in such a way that ,it provides clear bottom for placement of flask . Working on 230 V single phase.

Packing Details:

• At first, the unit is thoroughly cleaned and Wrapped with Polythene Sheet.
• Then the entire instrument is covered by Thermocol or Mic-Pag wherever it is necessary.
• Foundation is also made on the wooden platform to hold the equipment in its original position.
• At last, the wooden box is sealed to pack the complete instruments .
• We are please to introduce ourselves as " EIE Instruments " - a " Tech-Mech " group of company engaged in continuous technological revolution. As the world is functioning and progressing in quick technological succession , we at " EIE Instruments " have also set our leap forward in the direction of technological advancement.
• We are one of the leading ISO - 9001 certified manufacturers and suppliers in the field of Laboratory Equipments, having experience of over 30 years and expertise in our field. With a strong teamwork of over 100 techno - commercial people, we have the best set up for efficient administration, precise manufacturing, in house quality assurance and Calibration facilities. The dedicated team of over 20 service Engineers look after sale service and installation support all over India.
• Further, we are backed by modern infrastructure and expert professionals who assists us in developing testing equipments as per the exact requirements of the customers. We are reliable manufacturer, exporter, supplier and trader of quality products like Aggregate Testing, Bitumen/Bituminous Mix Testing, Cement Testing, Concrete Testing, General Laboratory Equipments, Metallurgical Laboratory Equipments, Modified Bitumen Testing, etc. The excellent performance and accuracy of our range is assured through a optimized quality mechanism that controls, checks and improves products. Moreover, our expertise in this domain has made us the prominent and the only choice of our clients.

Specifications:
Note : Price will be change as per specification

Product Details:

Features

• Supplied With solid state electronic Regulator
• Very easy to operate
• Accuracy of 0.2% by direct reading and 0.1% by estimation
• Complete with 'L' Bend thermometer with pans cap.

• Detailed Specifications

  The instrument consists of a 250 watt infrared lamp, a sensitive torsion balance and a temperature Controller, all housed in a compact cabinet made of Aluminum, having robust design. The Infra Red radiation from the lamp is used for heating the sample. The temperature is controlled by the solid state control. The sensitive torsion balance used magnetic damping to damp the vibrations of the pan. The instrument is directly calibrated in percentage of moisture between 0 to 100%. The Aluminum pans are cheap and disposable. This helps avoid loss of time, which otherwise would be spent each time to clean the pans after the experiment is done. Complete with instruction manual.

Available in various capacities

10 gram, 20 Grams, 25 Grams etc.

Price will be change as per specification

Product Details:

Round Hot Plate with Digital Controller Selection Guide

Round Hot Plate with Energy Regulator Selection Guide

NOTE - Price will be change as per specification.

 

Product Details:

Salient Features

• Double walled design
• Thick glass wool insulation to prevent heat loss
 
• Microprocessor based AUTO-TUNE PID Digital Temp Controller cum indicator
• Temperature range : 50 °C – 250 °C
• Temperature Accu : ± 0.5 °C
• Temperature display : Digital LED Display
 
• Operates on: 230 Volts, 50 Hz, Single phase, AC Supply
• Special heavy duty stainless steel lock and door hinges
• Heavy duty stainless steel trays for sample placement
• Observation window to observe the sample without opening chamber door
 
• Forced air circulation blower for Uniform Temperature Distribution
• Supplied complete with Calibration certificate , IQ-OQ-PQ Documents and test report
• Calibration certificate with NPL Traceability for temperature sensor and Digital controller
• Available in following sizes

Technical Specifications
Note - Price will be change as specification

Product Details:

Double walled waterbath Digital Controller Selection Guide
Double walled waterbath with Energy Regulator Selection Guide Optional accessories at extra cost

• 21-CFR (PART – 11) Compliance dedicated PC Software
• Data Logger – 4/8/16 channels with sensors
• Audio visual alarm for temperature Overshoot/Undershoot
• Timer facility
• Programmable controller with RAMP Setting facility

Note : Price will be change as per specification

Product Details:

Introduction:

Used for determination of Kinematic and intrinsic viscosity of fuels, lubricants & petro hem raw materials at constant temperatures in accordance with ASTM D 445 and other equivalent methods. Available in two versions, to work at above ambient temperature and below ambient temperature.

General Description & Specifications

Double walled, outer chamber made of G.I. - powder coated, with removable toughened Glass window panel, inner chamber made of S. S, FHP motorized stirrer for uniform temperature, Dual Display Microprocessor Based Digital Temp. Controller with PT-100 sensor. Temperature range from 5° C above ambient to 100° C., Control accuracy ± 0.1°C. Below ambient Viscosity Baths are fitted with Refrigeration system (Temperature Range : 10°C to 100°C). The Baths can accommodate 2 / 4 / 8 Viscometers with varying tank volumes.

• Stainless steel bath
• Temperature controller (Thermostatic/Digital)
• Immersion electric heater
• Constant speed Pump cum stirrer
• Carriage holding up to three standard briquette moulds
• Electric motor with gear mechanism
• Stainless steel scale and pointer
• Control Panel

Note - Price will be change as per specification

 

 

 

 

 

 

 

Product Details:

Technical Specifications

• Type : Horizontal Steam sterilizer, Single door, Cylindrical Type
• Jacket Working Pressure : 2.5 kg/cm2
• Hydro test (Pressure chamber) : 3.5 Kg/Cm2
• Hydro test (Jacket) : 4.0 Kg/cm2
• Inner Chamber : S.S. - 304 Grade
• Inner chamber thickness : 03 mm
• Jacket thickness : 02 mm
• Jacket : S.S. - 304 Grade
• Vacuum : Full (Up to -500mBar)
• Door gasket : Silicon Door Gasket (Food grade)
• Hinge & Locking rod : S.S. 304 Material
• Central locking parts : S.S. 304 Material
• Shooting bolts : S.S. 304 Material
• Steam Generator : Cylindrical shape steam generator made of S.S. - 304 Material
• Stand : SS Round Pipe
• Operation : Fully Automatic test cycle
• Vacuum Pump : Ejector type or watering Type Vacuum pump
• Temp/pressure indication : Digital Touch screen LCD Display
• Temperature Accuracy : 0.10 °C
• Pressure least count : 0.002 bars
• Heating : 2 Industrial immersion heaters - each of 9 Kw
• Automation system : Touch screen HMI with PLC
• HMI Make : Schneider Make
• PLC Make : Schneider Make
• Wheels : Castor Wheel on all 4 stands
• Documents : Operation & Maintenance Manual (SOP) DQ / IQ / OQ / PQ
• Safety features : Pressure switch, Vacuum breaker, Low water level indication and cut off.
• Operates on : 230 Volts, 50 Hz, Single Phase, AC Supply

• Single Door Cylindrical Sterilizer Selection Guide

  Inner dimensions (mm)	Inner dimensions (Inches)	Capacity (Liters)	Power consumption (Kw)	Fully Automatic Cylindrical Sterilizer (EIE-208SFA)	Manual Cylindrical Sterilizer (EIE-208SMO)
  400 x 600 mm	16 x 24	75	6.0	EIE-208SFA75	EIE-208SMO75
  400 x 1100 mm	16 x 44	145	9.0	EIE-208SFA145	EIE-208SMO145
  500 x 900 mm	20 x 36	185	9.0	EIE-208SFA185	EIE-208SMO185
  500 x 1200 mm	20 x 48	248	9.0	EIE-208SFA248	EIE-208SMO248
  500 x 1500 mm	20 x 60	310	12.0	EIE-208SFA310	EIE-208SMO310

• Double Door Cylindrical Sterilizer Selection Guide

  Inner dimensions (mm)	Inner dimensions (Inches)	Capacity (Liters)	Power consumption (Kw)	Fully Automatic Cylindrical Sterilizer (EIE-208DFA)	Manual Cylindrical Sterilizer (EIE-208DMO)
  400 x 600 mm	16 x 24	75	6.0	EIE-208DFA75	EIE-208DMO75
  400 x 1100 mm	16 x 44	145	9.0	EIE-208DFA145	EIE-208DMO145
  500 x 900 mm	20 x 36	185	9.0	EIE-208DFA185	EIE-208DMO185
  500 x 1200 mm	20 x 48	248	9.0	EIE-208DFA248	EIE-208DMO248
  500 x 1500 mm	20 x 60	310	12.0	EIE-208DFA310	EIE-208DMO310

Note : Price will be change as epr specification

Product Details:

Compliance Standards

IS 1360 part II : 1970

Details

Consists of accessories such as calorimeter vessel, Water jacket, Offset stirrer, crucible, Fine adjustment valve with built-in pressure gauge, Ignition wire, Palette press, electronic firintg unit and other dedicated accessories etc

• Microcontroller based
• Automatic measurement and calculation of CALORIFIC VALUE / WATER EQUIVALENT
• JUMBO size 16 x 2 characters LCD display with backlight
• Temperature Indication : 16 x 2 character Digit display
• Temperature Indication range : 0  100 °C
• Differential Temperature Range : 0 - 10 °C (Difference in water temp before & after firing the bomb)
• Reading Accuracy of Temperature : 0.01 °C
• Firing Voltage : 12 V AC
• Thermal printer interface for printing the final result
• Automatic detection of temperature rise & fall.
• Automatic operation eliminates the requirement of operator to be continuously
• Weight of tablet feedable through keypad by user.
• Water equivalent settable through keypad by user.
• Automatic alarm on Firing as well as after the test completes.
• Memory storage for data
• Dedicated PC Software

Note : Price will be change as per specification

 

 

 

 

 

 

 

 

 

 

Additional Information:

• Item Code: EIE-220A

Product Details:

Technical Specifications

·   Variable speed range:20 to 200 RPM approximately

·   Electric Motor:DC electric motor with Reduction Gear

·    Motor speed control:With electronic speed regulator (DC Drive)

·    RPM Indication:Digital RPM Indication

·    Motor Make:Of standard reputed make such as MARATHON / GE / REVOLUTION

·     Motor Watt:25 watt / 40 watt

·      Illumination:Built in Fluorescent tube under acrylic cover for each test positions

·      Operation on:230 Volts, 50 Hz, Single Phase, AC Supply

Product Details:

Body made of thick PCRC sheet-power coated or stainless steel (S.S.304).Top plate made of heavy C.I. or stainless steel and is fitted with the body in such a way that, the body gets minimum heat while the top plate is fully heated. Supplied complete with pilot indicating lamps, power plug and cord wire to work on 220/230 AC, Single phase. With three heat control switch and energy regulator.

Top plate size (cm)

• 25 X 30
• 25 X 40
• 30 X 50
• 45 X 60

Specifications:

• Rated Voltage: AC230V±10% 100Hz
• Slot Power: 370W×2 (1000W)
• Slot Holes: Two Slots and Four Holes
• Temperature Control: Digital Display Tem

Rectangular Hot Plate with Digital Controller Selection Guide

 Rectangular Hot Plate with Digital Controller Selection Guide

Note - Price will be change as per specification

 

Product Details:

Applications:

Used for particle size analysis in material testing laboratories, Civil engineering, Pharmaceutical Industries, Tiles Ceramic Industries, Cement industries, Education institutes etc.

Tri-Dimensional Shifting Motion:

• The instrument produces Tri-Dimensional movement combining a vertical movement with a rotation of the material to be shifted on the surface of the sieves.

Modes of shifting:

• Continuous
• Intermittent (Helps to clear blocked apertures)

Low Maintenance:

• Instrument is powered by electromagnetic drive which has no rotating parts, making it maintenance free and quiet in operation.

Isolation of vibration from work surface:

• Non-metallic spring and anti-vibration mountings are fitted to isolate vibrations from work surfaces and reduce noise levels

Programmable amplitude:

• Programmable amplitude (0.5 mm to 2 mm) in steps of 0.1 mm
• Amplitude feedback allows a smart adjustment of power to give reliable results independent of sample weight.

Quality by design:

• The vibratory actions produced by the power unit moves the sample all over the sieve in a unique way producing faster and more efficient sieving
• Unit has been designed for user friendly operations
• 40 x 4 character alpha-numerical display
• Unit has 15 levels of amplitude upto a maximum of 2mm as recommended by USP.
• The top plate of the sieve shaker has clearly marked calibrated lines to aid visual inspection of the amplitude.
• The instrument is fitted with a special clamping device that ensures that the sieves are held firmly and allows them to be quickly removed and replaced.
• Closed loop control of amplitude and validation independent of the load Very low noise operation with low maintenance.
• iTIME (Programmable from 10-99 seconds) for proper shifting of matter.

Note - Price will as per specification 

Product Details:

Features

• Inner Tank & Outer body made of Stainless Steel
• Digital RED LED display
• Temperature with timer function 
• Ceramic heaters provides improved heating effect 
• Drainage and cool fan available in 6L to 25L 
• Overheat protector, Cooling fan 
• Moisture-proof PCB 
• User friendly 
• High-performance transducers 

Ultra Sonic Cleaner Model Selection Guide

Note : Price will be change as per specification

Product Details:

Technical Specifications:

• Construction : Double walled
• Interior : S.S. - 304 Grade mirror polished Stainless steel material
• Exterior : Powder coated mild steel material
• Thermal Insulation : PUF insulation
• Insulation thickness : 70 mm
• Temperature Range : 5 °C to 60 °C
• Illumination : Fluorescent Tube light
• Fluorescent light watts : 11 Watts
• Heating source : U-shaped S.S. Tubular heaters
• Refrigeration : CFC free EMERSON compressor utilizing R-134a ecofriendly refrigerant
• Observation : Inner transparent acrylic door for quick viewing and retrieval
• Door lock : Ergonomic and secured key lockable door lock
• Feet on : Castor wheels (For easy mobility)
• Electrical : 230 Volt, 15A, 50 Hz, AC Supply
• Supplied complete with Calibration certificate , IQ-OQ-PQ Documents and test report
• Calibration certificate with NPL Traceability for temperature sensor and Digital controller

Technical Specifications



Note: Price will be change as per specification

Additional Information:

• Item Code: EIE-202

Product Details:

Introduction:

This Equipment is to speed up the process with ease and accuracy to prepare cylindrical specimens for Marshal Stability Testing Machine. The compactor has been designed to simulate hand compaction as described in ASTM D1559. This apparatus automatically compacts the sample and stops after preset number of blows has been completed. The Compactor gives Uniformly and accurately compacted marshal moulds for reliable testing.

Specification:

• It is a motor driven mechanical compactor useful for compaction into 100 mm dia moulds.
• It is fitted with a compaction rammer of 98.5mm dia, weighing 4.535 kg. with a free fall of 457 mm.
• The rammer assembly is provided with a ratchet and pawl arrangement to lift it from the top of the test sample. When the rammer reaches the required height the pawl release the rammer which falls freely on test specimen. The release mechanism is connected by an arm moving up and down which is connected to a reduction gear coupled to the motor through another arm. An automatic blow counter fitted to the compactor is used to set the number of blows. The Compactor is supplied complete with wooden pedestal. Suitable to work on 230 V, 50 Hz, AC single phase.
• Temperature Controlling Point: 24 degree c, 93.5 degree c

Note : Price will be change as per specification

Product Details:

Salient Features

·         Ideal for measuring whiteness & brightness

·         Same instrument can be used to measure Whiteness & Brightness by changing filters only

·         Standard MgCo3 block supplied with the instrument

·         Simple to operate

·         Instrument conforms to the basic requirement of IS : 101

Technical Specifications

·         Light  Source             :  Long life LED / Tungsten Lamp

·         Detector                    :  Sealed silicon photo detector

·         Diffuse Reflectance :  00.0 to 100.00 with negative & over range indication,

·         Display                       : 3.5 digit LED (With decimal display)

·         Accuracy                    : +- 1 %

·         Accessories               : MgCO3 block as a secondary standard, Power Trays, Pressure Plate, Dust Cover,  Manual, Plate for MgO Deposition, Mg wire, Blue Filter or Green Filter.

·         Dimensions               : 12 x 8 x 7.5 inches

·         Weight Net               : 3.5 Kg

·         Operating Voltage   : 230 V, 50 Hz, Single Phase, AC Power supply

Note : price will be change as per specification.

Additional Information:

• Item Code: EIE-TC-117

Product Details:

We are trading and manufacturer material testing equipment of various type and various models.

The Brookfield DV-E is the low cost solution for those customers wanting a calculating, digital, basic viscometer. This is a good upgraded choice for those previously using Brookfield dial reading instrument.

Features and benefits:

• Low cost digital viscometer
• Easy to use, Flip a switch, Turn a knob
• 18 Speeds for complete range capability
• No calculations required - Direct reading of viscosity in cP or mPa*s
• Complete with appropriate spindles, viscometer stand, guard leg and carrying case.
• Accuracy                    : ± 1.0% of range
• Repeatability               : ± 0.2%
• Viscosity Range           : 100++ Min / 13M Max
• Speeds                       : 0 .3-100 RPM
• No. of Increments        : 18
• Spindles(included)       : 06

Note:

• Price will be change as per specification

Additional Information:

• Item Code: RVDV-E

Product Details:

Specifications:

Note : Price will be change as per specification

Product Details:

At first, the unit is thoroughly cleaned and Wrapped with Polythene Sheet.Then the entire instrument is covered by Thermocol or Mic-Pag wherever it is necessary.Foundation is also made on the wooden platform to hold the equipment in its original position.
At last, the wooden box is sealed to pack the complete instruments.

Specifications:

Note : Price will be change as per specification

Product Details:

Fume Hood are recommended for exhaust from the hood working area of gases, vapour, toxic particles & odour to improve working environment of people who regularly handle toxic substances. These eqipments reduce personal exposures and odor level in the laboratory. The Fume Hoods are designed to exhaust toxic or otherwise harmful vapors etc. for protecting laboratory personnel & equipments. A motor-blower exhaust system generates negative pressure within the hood, extracting the contaminated air from the working area and expelling it outside the building atmosphere and thereby preventing the fumes spreading into the room.

Technical Specifications

• Working size : 3 x 2 x 2 Feet / 4 x 2 x 2 Feet / 5 x 2 x 2 Feet / 6 x 2 x 2 Feet
• Front door slide : 600 / 900 mm height from the bed /work table

    Worktable height : 750 / 900 mm from the floor level

• Air Balancing : 100% Exhaust with air bye-pass entry
• Noise Level : 70 dB "A" Scale if blower mounted outside the lab
• Suction Velocity : 80 to 100 FPM when the door half-closed
• Power Supply : Three Phase, 415 V, 50 Hz

Available in following sizes
Note - Price will be change as per specification

Product Details:

Rotary Flask Shaker is useful for uniform mixing by circular motion in a horizontal plane with a circuit diameter of about 25 mm. Used extensively in tissue culture work, aeration of fermentation and other chemical mixing procedures. The driving mechanism is enclosed in a mild steel sheet cabinet beautifully painted. The shaker is fitted with DC Motor with electronic speed regulator. The DC Motor will ensure continuous work and precise speed control. The shaking speed will be 50-250 RPM approx. The top platform have neoprene rubber discs to hold conical flask in between them.

Specifications:

Note : Price will be change as per specification

Additional Information:

• Item Code: EIE-113

Product Details:

Applications

For procedure requiring constant shaking, uniform temperature & controlled atmosphere

Technical Specifications

• Construction : Double walled
• Inner chamber : Polished stainless steel material S.S. - 304 grade
• Exterior body : Fabricated from Mild steel material
• Paint : Powder coating
• Insulation : Glass wool insulation to prevent direct thermal heat loss
• Temperature Range : From 5 °C above ambient to 99 °C
• Heating : Open type Air heaters placed at the bottom of the inner chamber.
• Temperature controller : Microprocessor based Auto-Tune PID Digital Temperature controller cum indicator
• Temperature Stability : ± 0.5 °C
• Temperature accuracy : ± 0.5 °C
• Heater control : By control switch installed in the control panel
• Heater Status : Control indication lamp
• Shaking : Achieved by PMDC Geared Motor
• Motor RPM : 40-150 RPM
• Motor speed display : Digital RPM Indicator (Optional)
• Speed control : By electronic Speed Regulator
• Shaking racks material : Stainless steel material S.S. - 304 Grade
• Bath chamber Size : 15” x 16” x 8” cm /20” x 18” x 8”(W x D x H)
• Bath Volume : 30 Liters
• Power consumption : 02 KW
• Operates on : 230 Volts, 50 Hz, Single phase, AC Supply
• Supplied complete with Top Stainless Steel Pyramidal Lid

• Digital/Powder coated Model No	Digital/GMP  Model No	To hold capacity
  EIE-405DP6	EIE-405DG6	6 flasks of 100 ml
  EIE-405DP12	EIE-405DG12	9 flasks of 250 ml
  EIE-405DP24	EIE-405DG24	16 flasks of 250 ml
  EIE-405DP30	EIE-405DG30	18 flasks of 250  ml

• Note - Price will be change as per specificetion.

Product Details:

SALIENT FEATURES

• PMDC motor for higher torque even at low speeds
• Better speed regulation even with small volume and low speeds
• Accurate stepless speed control maintains excellent speed stability.
• Digital Speed Indicator for displaying of stirring speed
• Totally enclosed unit
• Designed for use even in corrosive atmosphere

Selection guide

• Technical Specifications
  Models	Stirring Capacity	Healing Capacity	External Dlmensions	Stirring Paddle (PTFE Coated)
  	Ltrs	Watts	(W x D x H)) mm	Model	x Length
  Stirrers without Hotplate
  MS 500	500 ml	–	105 x 135 x 70	Q-18A	7 x 15 mm
  Stirrers without Hotplate (with Diigtal Speed Indicator)
  1 ML	1	–	150 x 220 x 150	Q-19	9 x 25 mm
  2 ML	2	–	150 x 220 x 150	Q-19A	9 x 35 mm
  5 ML	5	–	180 x 220 x 150	Q-20A	13 x 50 mm
  10 ML DX	10	–	250 x 250 x 205	Q-20A	13 x 50 mm
  Stirrers with Hotplate (with Diigtal Speed Indicator)
  1 MLH	1	150	200 x 225 x 185	Q-19	9 x 25 mm
  2 MLH	2	300	200 x 225 x 185	Q-19A	9 x 35 mm
  5 MLH	5	500	200 x 225 x 185	Q-20A	13 x 50 mm

Price will be change as per specification

Additional Information:

• Item Code: EIE-223ML

Product Details:

Applications

• A disc type grinder, designed to grind virtually any material to produce a fine mesh sample in one operation.

Brief construction details

• A self contained grinder, with a rotary disc, having a planetary movement in a vertical plane.
• Grinding is done between two discs, one of which is stationary and the other is revolving eccentrically at high speed.
• Discs are made from heat treated mechanized metal.
• Size of final discharges product can be adjusted with the help of convenient hand wheel. This can be done, even while the machine is in operation.
• Provision for removal of ground samples & easy to clean
• Capacity of reducing about ½ kg of Quartz type sample into 100 mesh/minute
• Supplied complete with a 3 H.P. Motor, a starter, "V" Belt pulley, drive and mounting

Technical Specifications

• Disc Diameter : 175 mm
• Maximum feed Size : 1-6 mm
• Yield : 250 gms/min
• Discharge product Size : 100 mesh to 150 mesh
• Operation on : 440 Volts, 50 Hz, 3-Phase, AC Supply

Note : Price will be change as pe specification

 

 

 

 

Product Details:

Purpose

A Venturi meter is a tube with a constricted throat that increases velocity and decreases pressure. Venturi meters are used for measuring the flow rate of both compressible and incompressible fluids in a pipeline. The apparatus is designed to measure the co-efficient of discharge of Venturimeter. The trainer is self-sufficient unit to study the calibration characteristics of venturimeter.

 

Construction Details

• The setup consists of sump tank, pump, Venturi meter &  measuring tank.
• The entire system is mounted on a sturdy MS frame.
• The apparatus consists of a pipeline containing Venturimeter.
• The pressure tapings from the Venturimeter to diff. manometer to measure pressure difference is provided.
• By operating the valves, provided at the downstream side,  the flow can be regulated.
• Present set-up is self-contained water re-circulating unit.
• Flow control valve and by-pass valve are fitted in water  line to conduct the experiment on different flow rates.
• Flow rate of water is measured with the help of measuring tank and stopwatch.

Product Details:

Technical Specifications

• Direction of flow : Horizontal
• Velocity : 90 FPM ± 20%
• Particle retention : Above 0.3 micron
• Blower Assembly : 1/6 HP, 1440 RPM
• Noise level : 65 decibel ± 5%
• Rate of air flow : 0.40 to 0.75 M/Seconds (90 FPM)
• Vibration level : <2.5 micron
• HEPA Filter : MiniPleat HEPA Filter (H-14 Rating)
• Efficiency : 99.997%
• Work table : S.S. 304/S.S. 316 Grade

• Available in following sizes
•  

  Working Table Size (Feet)	HEPA Filter	No of Pre-Filter	UV Tube	Model Nos. (EIE-111HP)	GMP Model Nos. (EIE-111HG)
  2 x 2 x 2	2 x 2 x 6	1	1 x 20 Watts	EIE-111HP2	EIE-111HG2
  3 x 2 x 2	3 x 2 x 6	1	2 x 20 Watts	EIE-111HP3	EIE-111HG3
  4 x 2 x 2	4 x 2 x 6	1	2 x 40 Watts	EIE-111HP4	EIE-111HG4
  6 x 2 x 2	3 x 2 x 6 (2 Nos)	2	2 x 40 Watts	EIE-111HP6	EIE-111HG6
  8 x 2 x 2	4 x 2 x 6 (2 Nos)	2	4 x 40 Watts	EIE-111HP8	EIE-111HG8

• Note - Price will be change as per specification

Additional Information:

• Item Code: EIE111HG

Product Details:

Technical Specifications
Note : Price will be change as per specification

Product Details:

Technical Specifications

• Model : Floor standing with castor wheels
• Construction : Double walled construction
• Insulation : Glass wool and Puff Insulation
• Inner chamber : S.S. - 304 material
• Exterior body : Mild Steel Material
• Paint : Powder coated
• Temp. Range : - 20°C to 100°C
• Temp Accuracy : ± 1°C
• Temp Controller : Microprocessor based PID controller with RAMP/SOCK timer
• Safety device : Adjustable low and high temperature safety devices.
• Cooling rate : 1°C/2°C/3°C per minute
• Heating rate : 1°C/2°C/3°C per minute
• Trays : Stainless steel trays
• Gasket : Silicon gasket
• Door handle : Ergonomic door handle and lock
• Blower : For forced air circulation
• Observation : Facility for viewing inner chamber
• Illumination : For viewing test space
• Refrigeration : CFC - free cascade refrigeration
• Power : 230V, 50Hz, Single Phase
• Mobility : On castor wheels
• Technical Specifications

  Working chamber sizes (CM) (H x D x W)	Overall dimensions (CM) (H x D x W)	Volume (Liters)	No of trays	Power ratings (KW)	Weight (KG)	Digital Model Numbers (EIE-115PBA)	Digital GMP Model Numbers (EIE-115GBA)
  45 x 45 x 45 cm	119 x 74 x 66	92	2	2.0	115	EIE-115PBA92	EIE-115GBA92
  70 x 50 x 50 cm	145 x 76 x 71	175	3	2.5	135	EIE-115PBA175	EIE-115GBA175
  60 x 60 x 60 cm	135 x 84 x 81	216	3	2.5	150	EIE-115PBA216	EIE-114GBA216
  90 x 60 x 60 cm	165 x 84 x 81	324	3	3.0	157	EIE-115PBA324	EIE-115GBA324
  125 x 60 x 60 cm	201 x 84 x 81	450	4	3.5	175	EIE-115PBA450	EIE-115GBA450
  125 x 70 x 70 cm	201 x 94 x 91	612	4	3.5	198	EIE-115PBA612	EIE-115GBA612
  125 x 80 x 80 cm	201 x 104 x 102	800	5	3.0	220	EIE-115PBA800	EIE-115GBA800
  125 x 90 x 90 cm	201 x 114 x 112	1000	5	3.0	245	EIE-115PBA1000	EIE-115GBA1000

• Note : Price will be change as per specification

Product Details:

Salient Features

• Round Bottom
• Small footprint
• Bench top design
• Electric heating net is hand knitted from glass yarn and there is no joint to maintain the strength of the yarn.
• Stands high temperature up to 350 °C.
• The body of the mantle is spun one piece from non-rusting Aluminum (up to 5.0 Liters Capacity) duly staving painted. (Corrosion resistant body)
• All heating mantles are lagged with special grade mineral wool
• Temperature : Adjustable from ambient to 350 °C
• Continuous Operation : Continue working time 8 hours
• Capacity : 50, 100, 250, 500, 1000 ml, 1 liter, 2 liter, 5 liter, 10 liter, 20 liter
• Operates on : 220/230 Volts, 50 Hz, Single Phase, A.C Supply

• Selection guide

  Capacity (Liters)	Power consumption (Watts)	Operating voltage (Volts)	No of circuits	Model No (EIE-214EP)
  50 ML	60	230	1	EIE-214EP0.05
  100 ML	60	230	1	EIE-214EP0.10
  250 ML	150	230	1	EIE-214EP0.25
  500 ML	200	230	1	EIE-214EP0.50
  1	300	230	1	EIE-214EP1
  2	450	230	1	EIE-214EP2
  3	500	230	1	EIE-214EP3
  5	600	230	1	EIE-214EP5
  10	1000	230	2	EIE-214EP10
  20	1800	230	3	EIE-214EP20
  50	3600	440	3	EIE-214EP50
  100	5400	440	3	EIE-214EP100

• Note : Price will be change as per specification.

Product Details:

Applications

• Built for mixing and grinding the cement and limestone samples

 Salient Features

• Easy to operate
• Easy to clean
• All control accessories are within reach
• Consists of a drum made of welded steel
• External body powder coated in attractive shades
• Steel balls of different sizes are to be put in the chamber
• Electrically operated unit
• The entire drum is supported on heavy duty bearings.
• Fitted with Fractional Horse Power Motor Gear unit with the maximum 40 rpm speed.
• A reduction gear driven by a motor rotates the ball mill at 28-40 RPM.
• Supplied complete with 12-19 mm dia steel balls and revolution Counter.
• Drum Size :300mm Diameter x 300mm Length respectively
• Electric Motor : DC Motor
• Electric Motor : Crompton / GE / Any other reputed make
• Operates on : 230 volt, 50 Hz, Single phase, AC supply

Note : Price will be change as per specification

Product Details:

Technical Specifications
Note : Price will be change as per specification